HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1334 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
SF0067
Manufacturer:
Halogen-free, Phosphorus-free
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Halogen-free, Phosphorus-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Grilamid LV-3H black 9590
Manufacturer:
EMS-GRIVORY
High impact or impact modified, Light stabilized or stable to light, Heat stabilized or stable to heat
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Light stabilized or stable to light, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Grilamid LV-30H FWA natural
Manufacturer:
EMS-GRIVORY
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Grilamid LV-3A H natural
Manufacturer:
EMS-GRIVORY
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID® L-R2-GF25 BK
Manufacturer:
Increased electrical conductivity, Light stabilized or stable to light, Heat stabilized or stable to heat
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Light stabilized or stable to light, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Grilamid LBV-30H FWA black 9225
Manufacturer:
EMS-GRIVORY
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID® L-R2-GF25 BK
Manufacturer:
Injection Molding Increased electrical conductivity, Light stabilized or stable to light, Heat stabilized or stable to heat
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Increased electrical conductivity, Light stabilized or stable to light, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Grilamid L XE 4301 black 9544
Manufacturer:
EMS-GRIVORY
Improved friction & wear properties, Improved heat resistance
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved friction & wear properties, Improved heat resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Grilamid LV-23H natural
Manufacturer:
EMS-GRIVORY
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolysis resistant, Improved impact resistance, Improved heat resistance, Improved UV resistance (outdoor use)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Grilamid LBV-25H black 9472
Manufacturer:
EMS-GRIVORY
Hydrolysis resistant, Improved heat resistance
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolysis resistant, Improved heat resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID® L-GF15
Manufacturer:
Heat stabilized
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
D 340/346
Manufacturer:
HITHOR
Injection Molding
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Grilamid LBKN-50H FWA black 9225
Manufacturer:
EMS-GRIVORY
Hydrolysis resistant, Improved heat resistance
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolysis resistant, Improved heat resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA 614-GS/PA12-GB40
Manufacturer:
Additive Manufacturing, Laser Sintering
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Additive Manufacturing, Laser Sintering
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID® Care ML-GB30
Manufacturer:
Evonik
Medical Grade, Biocompatibility ISO 10993, US Pharmacopeia Class VI Approved
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medical Grade, Biocompatibility ISO 10993, US Pharmacopeia Class VI Approved
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAPE® PA12-CF45 20641
Manufacturer:
Evonik
High chemical resistance, low water absorption, steady mechanical properties over a wide temperature range, increased electrical conductivity, heat stabilized
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High chemical resistance, low water absorption, steady mechanical properties over a wide temperature range, increased electrical conductivity, heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Grilamid LBKN-30H FWA black 9225
Manufacturer:
EMS-GRIVORY
Hydrolysis resistant, Improved friction & wear properties, Improved heat resistance
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolysis resistant, Improved friction & wear properties, Improved heat resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA 603-CF / PA12-CF
Manufacturer:
No Characteristics
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
D 446
Manufacturer:
HITHOR
Injection Molding
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Complet® LCF30 - PA12
Manufacturer:
Long fiber reinforced
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Long fiber reinforced
Recorded properties are for screening; verify source data and conditions.
Total 1334 materials | Scroll down for more