HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (3603 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
RTP 200 C TFE 10 (PA11+PTFE)
制造商:
None
No Characteristics
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA11+PTFE-CF25_RTP 284 C TFE 15
制造商:
RTP公司
Contains renewable resources
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LNP™ LUBRICOMP™ Compound UX05051
制造商:
沙特基础工业公司
Heat Stabilized, Flame Retardant, Hot Water Moldable, Wear Resistant
Physical Properties
Density
1.76
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Stabilized, Flame Retardant, Hot Water Moldable, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA+PTFE-CF30_LNP™ LUBRICOMP™ Compound UX06427
制造商:
沙特基础工业公司
Heat Stabilized, Hot Water Moldable, Wear Resistant, Electrically Conductive
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Stabilized, Hot Water Moldable, Wear Resistant, Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
RTP 207 E TFE 15 (PA*+PTFE)-GF40
制造商:
None
Amorphous
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Amorphous
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRICOMP™ Compound UCL36S (PA*+PTFE)-CF30
制造商:
LNP™
Internally Lubricated, Wear Resistant, Heat Stabilized, Electrically Conductive
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Internally Lubricated, Wear Resistant, Heat Stabilized, Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LNP™ LUBRICOMP™ Compound UCL16AS (PA*+PTFE)-CF30
制造商:
沙特基础工业公司
Heat Stabilized, Wear Resistant, Electrically Conductive
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Stabilized, Wear Resistant, Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
4405 TFE 15 (PA*+PTFE)-GF30
制造商:
None
No Characteristics
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRICOMP™ Compound UCL36ASP (PA*+PTFE)-CF30
制造商:
LNP™
Internally Lubricated, Electrically Conductive, Heat Stabilized, Wear Resistant
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Internally Lubricated, Electrically Conductive, Heat Stabilized, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LNP™ LUBRICOMP™ Compound UX06002
制造商:
沙伯基础工业公司
Easy Molding, Internally Lubricated, Heat Stabilized, Wear Resistant
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding, Internally Lubricated, Heat Stabilized, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
3400-3 TFE 20 (LCP+PTFE)
制造商:
RTP公司
未知
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
未知
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
VECTRA® MT®1310 (LCP+PTFE)-GF30
制造商:
塞拉尼斯
easy flow, easy processing, thermal stability, chemical resistance, mechanical and electrical properties
Physical Properties
Density
1.62
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
easy flow, easy processing, thermal stability, chemical resistance, mechanical and electrical properties
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
3405-4 TFE 15 (LCP+PTFE)-GF30
制造商:
None
No Characteristics
Physical Properties
Density
1.69
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
3405-3 TFE 15 (LCP+PTFE)-GF30
制造商:
RTP公司
未指定
Physical Properties
Density
1.69
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
未指定
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
3485-4 TFE 15 (LCP+PTFE)-CF30
制造商:
RTP
Injection Molding
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRICOMP™ Compound 2FL24 (ETFE+PTFE)-GF20
制造商:
LNP™
耐磨
Physical Properties
Density
1.8
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
耐磨
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
RTP 605 TFE 15 (ABS+PTFE)-GF30
制造商:
None
No Characteristics
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
RTP 603 TFE 5 (ABS+PTFE)-GF20
制造商:
None
No Characteristics
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
RTP 600 TFE 5 (ABS+PTFE)
制造商:
RTP公司
Injection Molding
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LubriOne™ AS-000/15T (ABS+PTFE)
制造商:
None
No Characteristics
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 3603 materials | Scroll down for more