HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (3603 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
RTP 600 TFE 10 (ABS+PTFE)
制造商:
None
No Characteristics
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LNP™ LUBRICOMP™ Compound AL002 (ABS+PTFE)
制造商:
沙特基础工业公司
Wear Resistant
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
RTP 600 TFE 20 (ABS+PTFE)
制造商:
None
No Characteristics
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
RTP 603 TFE 13 SI 2 (ABS+PTFE+SI)-GF20
制造商:
None
No Characteristics
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
RTP 603 TFE 15 (ABS+PTFE)-GF20
制造商:
RTP公司
Injection Molding
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
601 TFE 10 (ABS+PTFE)-GF10
制造商:
RTP
Injection Molding
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
681 TFE 15 (ABS+PTFE)-CF10
制造商:
None
No Characteristics
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
200 A TFE 30
制造商:
RTP
Injection Molding
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM PA6 900/1 PTFE10 IM
制造商:
None
heat stabilised,impact modified,improved sliding / wear
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,impact modified,improved sliding / wear
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
207 A TFE 10
制造商:
RTP公司
Injection Molding
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6+PTFE-GF30_ALCOM PA6 9001 GF30 TF15 SI2 IM
制造商:
None
high stiffness,heat stabilised,improved sliding / wear
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high stiffness,heat stabilised,improved sliding / wear
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6+PTFE-GF30 SAXAMID™ 126F6T3
制造商:
None
Low Odor, Tribologic Grade
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Odor, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
205 A TFE 5
制造商:
RTP
Injection Molding
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
205 A TFE 15
制造商:
RTP
Injection Molding
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6+PTFE-GF30_POLIMID LUB B 3015 GFTF_S
制造商:
None
No Characteristics
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
203 A TFE 10
制造商:
None
Injection Molding
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
B3 P5 S5 NTLA016 NT431
制造商:
Nypol
Injection Molding
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA46+PTFE_TECACOMP® PA46 TF30 natural 3148
制造商:
None
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA46+PTFE TEREZ® PA 4.6 7115 TF 15
制造商:
None
For injection moulding parts with improved wear resistance and friction properties
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
For injection moulding parts with improved wear resistance and friction properties
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ALCOM PA46 920/1 PTFE15
制造商:
None
improved sliding / wear, heat stabilised
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear, heat stabilised
Recorded properties are for screening; verify source data and conditions.
Total 3603 materials | Scroll down for more