HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2638 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PX1180
制造商:
诺瑞尔
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PX0888
制造商:
NORYL™
Non-reinforced blend, low moisture absorption, hydrolytic stability, dimensional stability, good foam adhesion, property retention over a wide temperature range
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-reinforced blend, low moisture absorption, hydrolytic stability, dimensional stability, good foam adhesion, property retention over a wide temperature range
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
NORYL™ Resin PX1185
制造商:
沙特基础工业公司
高冲击改性
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
高冲击改性
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PX1134
制造商:
NORYL™
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PX1112
制造商:
沙特基础工业公司
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High heat resistance, good impact resistance, low specific gravity, and dimensional stability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
NORYL™ Resin PX1134
制造商:
沙特基础工业公司
High impact or impact modified
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PX0888
制造商:
诺瑞尔
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PX0888
制造商:
诺瑞尔
low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, property retention over a wide temperature range
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, property retention over a wide temperature range
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PKN4775F
制造商:
NORYL™
High Heat, Thin Wall Extrusion and Injection Moldable, Good Chemical Resistance, FDA Food Compliant
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Heat, Thin Wall Extrusion and Injection Moldable, Good Chemical Resistance, FDA Food Compliant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PVX1201
制造商:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PX0844
制造商:
None
very low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, property retention over a wide temperature range
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very low moisture absorption, hydrolytic stability, dimensional stabilty, good foam adhesion, property retention over a wide temperature range
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PVX1201
制造商:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PVX1201
制造商:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PKN4775F
制造商:
NORYL™
High Heat, Thin Wall Extrusion and Injection Moldable, Good Chemical Resistance, FDA Food Compliant
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Heat, Thin Wall Extrusion and Injection Moldable, Good Chemical Resistance, FDA Food Compliant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPO534
制造商:
NORYL™
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact strength, dimensional stability, hydrolytic stability, very low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PVX0901
制造商:
NORYL™
High flow, injection moldable, non-brominated, non-chlorinated flame retardant, good dimensional stability, low moisture absorption, low specific gravity
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High flow, injection moldable, non-brominated, non-chlorinated flame retardant, good dimensional stability, low moisture absorption, low specific gravity
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PVX1201
制造商:
NORYL™
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS)
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PKN4775
制造商:
NORYL™
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PVX1201
制造商:
NORYL™
Low moisture absorption, creep resistance, dimensional stability, and hydrolytic stability
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low moisture absorption, creep resistance, dimensional stability, and hydrolytic stability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PX0844
制造商:
诺瑞尔
non-reinforced blend
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
non-reinforced blend
Recorded properties are for screening; verify source data and conditions.
Total 2638 materials | Scroll down for more