HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (25727 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA66 7600 H
Manufacturer:
Medium viscosity, good flowability and heat stabilisation, For long moulding parts, short cycletime, good demoulding
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium viscosity, good flowability and heat stabilisation, For long moulding parts, short cycletime, good demoulding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 TEREZ® PA 6.6 7610
Manufacturer:
good flowability, good impact strength, good demoulding
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good flowability, good impact strength, good demoulding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 TEREZ® PA 6.6 7600 AE
Manufacturer:
Medium viscosity, good flowability, good impact resistance, bright natural colour, long flow distances, short molding cycles, good demoldability
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium viscosity, good flowability, good impact resistance, bright natural colour, long flow distances, short molding cycles, good demoldability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 TEREZ® PA 6.6 7750 TD SF
Manufacturer:
Dry impact modified
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Dry impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 7600
Manufacturer:
good flowability and impact strength
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good flowability and impact strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 7750 T H
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 TEREZ® A 300 H SI2
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 7610 H
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 TEREZ® PA 6.6 7630
Manufacturer:
Medium-viscosity, unfilled
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium-viscosity, unfilled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 7750 TD
Manufacturer:
Dry impact modified
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Dry impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 7750 T H SF
Manufacturer:
Dry impact modified Polyamide 6.6 with good flowability, good demoldability and heat stabilizer
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Dry impact modified Polyamide 6.6 with good flowability, good demoldability and heat stabilizer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 TEREZ® PA 6.6 7600 A
Manufacturer:
Regional Availability Europe
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Regional Availability Europe
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 TEREZ® AE 300
Manufacturer:
High sustainability due to recycled raw materials
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High sustainability due to recycled raw materials
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 7750 TC
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 7750 T
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 66 1 ZA-3
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 66 2 H MV
Manufacturer:
No Characteristics
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 MO black 3628
Manufacturer:
No Characteristics
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66_Starflam® FR350J NT0727
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66_Starflam® FR350J BK0802
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Total 25727 materials | Scroll down for more