HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2573 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
2301 C
Manufacturer:
Injection Molding
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1201 S-90A
Manufacturer:
RTP
Shore A Hardness 85
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Shore A Hardness 85
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Desmovit® DP R 3932
Manufacturer:
Acoustical Barrier Properties, Thermal Stability, Chemical Resistance, Oil Resistance
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Acoustical Barrier Properties, Thermal Stability, Chemical Resistance, Oil Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2302 A
Manufacturer:
Injection Molding
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Complet® LCF50
Manufacturer:
Injection Molding
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2387 A
Manufacturer:
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2385 C
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2387 C
Manufacturer:
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM TPU 810/3070.1 CF15
Manufacturer:
electrically conductive, reduced surface resistivity
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
electrically conductive, reduced surface resistivity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2382 A
Manufacturer:
Injection Molding
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2382 C
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2383 A
Manufacturer:
Injection Molding
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2385 A
Manufacturer:
Injection Molding
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2381 C
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Complet® LCF15/LGF35
Manufacturer:
long fiber reinforced
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
long fiber reinforced
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan® 1185 A
Manufacturer:
excellent resistance to hydrolysis, good flexibility at low temperature, resistance to microbiological attack, good wear performance, high tensile strength, good damping behavior
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent resistance to hydrolysis, good flexibility at low temperature, resistance to microbiological attack, good wear performance, high tensile strength, good damping behavior
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan® SP 806
Manufacturer:
good wear performance, good damping behavior and rebound elasticity, high tensile strength, good resistance to tear propagation
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good wear performance, good damping behavior and rebound elasticity, high tensile strength, good resistance to tear propagation
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2381 A
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan 1185 A
Manufacturer:
excellent resistance to hydrolysis, good flexibility at low temperature, resistance to microbiological attack, good wear performance, high tensile strength, good damping behavior
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent resistance to hydrolysis, good flexibility at low temperature, resistance to microbiological attack, good wear performance, high tensile strength, good damping behavior
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan® 1195 A
Manufacturer:
excellent resistance to hydrolysis, good flexibility at low temperature, resistance to microbiological attack, good wear performance, high tensile strength, good damping behavior
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent resistance to hydrolysis, good flexibility at low temperature, resistance to microbiological attack, good wear performance, high tensile strength, good damping behavior
Recorded properties are for screening; verify source data and conditions.
Total 2573 materials | Scroll down for more