HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
TPU-Z20
Manufacturer:
Injection Molding, Medical, Chemical Resistance, Radiation Resistance
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Medical, Chemical Resistance, Radiation Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AC-4095A-B20
Manufacturer:
No Characteristics
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AC-4055D-B20
Manufacturer:
Injection Molding, Other Extrusion
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Aliphatic PC-3555D-B20
Manufacturer:
Carbothane
Injection Molding, Other Extrusion
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Aliphatic PC-3585A-B20
Manufacturer:
Carbothane
Injection Molding, Other Extrusion
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NEVISHIELD 250D
Manufacturer:
EMI Attenuation/Shielding
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
EMI Attenuation/Shielding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EMI 1261 S-65D
Manufacturer:
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPU-NF15
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPU-W20
Manufacturer:
Biofiber Tech´s product, consisting of surface-modified wood fibers with enhanced hydrophobicity, low moisture absorption and high flowability within polymer matrices
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Biofiber Tech´s product, consisting of surface-modified wood fibers with enhanced hydrophobicity, low moisture absorption and high flowability within polymer matrices
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Compound 4703ZD95
Manufacturer:
EMI Attenuation/Shielding, Low Odor
Physical Properties
Density
10.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
EMI Attenuation/Shielding, Low Odor
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Carbothane® Aliphatic PC-3575A-B20
Manufacturer:
Injection Molding, Other Extrusion, General Chemical Resistance, Oxidation Resistance, Radiation Resistance
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion, General Chemical Resistance, Oxidation Resistance, Radiation Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
4703ZD90
Manufacturer:
EMI Attenuation/Shielding, Low Odor
Physical Properties
Density
7.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
EMI Attenuation/Shielding, Low Odor
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EMI 1261 S-65D
Manufacturer:
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NEVISHIELD 250D
Manufacturer:
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Aliphatic PC-3572D-B20
Manufacturer:
Carbothane
Injection Molding, Other Extrusion
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Other Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPU-W20
Manufacturer:
Surface-modified wood fibers with enhanced hydrophobicity, low moisture absorption and high flowability within polymer matrices
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Surface-modified wood fibers with enhanced hydrophobicity, low moisture absorption and high flowability within polymer matrices
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Estaloc® 59104 RETPU
Manufacturer:
Injection Molding
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Compound 4703ZD88
Manufacturer:
EMI Attenuation/Shielding, Low Odor, Chemical Resistance, Radiation Resistance
Physical Properties
Density
6.8
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
EMI Attenuation/Shielding, Low Odor, Chemical Resistance, Radiation Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FibraQ TPU 03-20
Manufacturer:
Surface-modified wood fibers with enhanced hydrophobicity, low moisture absorption and high flowability within polymer matrices
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Surface-modified wood fibers with enhanced hydrophobicity, low moisture absorption and high flowability within polymer matrices
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Estaloc® 59300 RETPU
Manufacturer:
No Characteristics
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more