HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (31201 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PE-LD_TerXene eco LDPE film-2105
制造商:
特普拉斯特斯
No Characteristics
Physical Properties
Density
0.91
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD_TerXene eco LDPE film-1402
制造商:
特塑料
Blown Film Extrusion, Film Extrusion
Physical Properties
Density
0.91
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Blown Film Extrusion, Film Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD TerXene eco LDPE film-0601
制造商:
特塑料
No Characteristics
Physical Properties
Density
0.925
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD RTP 799 X 50492 L
制造商:
None
No Characteristics
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD RSH LDPE 2000 WW
制造商:
None
No Characteristics
Physical Properties
Density
0.925
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD rLDPE natural
制造商:
None
Regional Availability
Physical Properties
Density
0.925
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Regional Availability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD RSH LDPE 2010 F
制造商:
None
No Characteristics
Physical Properties
Density
0.925
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD 2000 WW
制造商:
None
No Characteristics
Physical Properties
Density
0.925
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD Retene-LD LDPE Pellets translucent MFR 0,4-1,0
制造商:
None
Pellets
Physical Properties
Density
0.925
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Pellets
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE 3040 D (PE-LD)
制造商:
Purell
Injection Molding, Blow Molding, Medical Grade, Biocompatibility
Physical Properties
Density
0.928
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Blow Molding, Medical Grade, Biocompatibility
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE3420F (PE-LD)
制造商:
None
Injection Molding, Blown Film Extrusion, Blow Molding
Physical Properties
Density
0.933
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Blown Film Extrusion, Blow Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE 1840 H
制造商:
None
No Characteristics
Physical Properties
Density
0.919
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD 023919
制造商:
Amco聚合物
No Characteristics
Physical Properties
Density
0.919
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD 002918
制造商:
None
No Characteristics
Physical Properties
Density
0.918
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD 023919
制造商:
None
No Characteristics
Physical Properties
Density
0.919
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD 002918
制造商:
None
No Characteristics
Physical Properties
Density
0.918
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD 763-01 Natural
制造商:
None
No Characteristics
Physical Properties
Density
0.919
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD CP 851-01 GM NATURAL
制造商:
林德巴塞尔工业公司
Injection Molding
Physical Properties
Density
0.921
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD 002918AB
制造商:
None
Film Extrusion, Profile Extrusion, Blow Molding
Physical Properties
Density
0.918
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Film Extrusion, Profile Extrusion, Blow Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PE-LD CP 795-01 Natural
制造商:
None
Injection Molding, Blow Molding, Heat Sealable
Physical Properties
Density
0.919
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Blow Molding, Heat Sealable
Recorded properties are for screening; verify source data and conditions.
Total 31201 materials | Scroll down for more