HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (3608 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
LNP™ LUBRICOMP™ Compound FL004
Manufacturer:
沙特基础工业公司
Wear Resistant
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PL4001NT (PE+PTFE)
Manufacturer:
None
Injection Molding Tribologic Grade
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PE/4L1 (PE+PTFE)
Manufacturer:
None
No Characteristics
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ LUBRICOMP™ Compound FL003
Manufacturer:
沙特基础工业公司
Wear Resistant
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PE/4L3 (PE+PTFE+SI)
Manufacturer:
None
No Characteristics
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PET+PTFE-CF TECACOMP® PET TRM black 9415
Manufacturer:
None
Tribologic Grade
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ LUBRICOMP™ Compound JZL012
Manufacturer:
沙特基础工业公司
Internally Lubricated, Wear Resistant, Dimensional Control
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Internally Lubricated, Wear Resistant, Dimensional Control
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PESU+PTFE-CF30
Manufacturer:
None
Increased electrical conductivity
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 4001
Manufacturer:
沙特基础工业公司
PTFE filled, standard flow
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
PTFE filled, standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Resin 4002
Manufacturer:
ULTEM™
Standard flow, ECO Conforming
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Standard flow, ECO Conforming
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 4001
Manufacturer:
None
PTFE filled, standard flow
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
PTFE filled, standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2100 LF TFE 10
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 4001
Manufacturer:
沙特基础工业公司
Standard flow
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI/3L1
Manufacturer:
维特康
Processing/Physical Characteristics, Mechanical properties, Thermal properties, Burning behav. at 1.5 mm nom. thickn., Electrical properties, Other properties
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Processing/Physical Characteristics, Mechanical properties, Thermal properties, Burning behav. at 1.5 mm nom. thickn., Electrical properties, Other properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Resin 4001
Manufacturer:
ULTEM™
PTFE filled, standard flow
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
PTFE filled, standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound EL003
Manufacturer:
LNP™
Wear Resistant
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ LUBRICOMP™ Compound EL002
Manufacturer:
沙特基础工业公司
Wear Resistant
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound EL002
Manufacturer:
LNP™
Wear Resistant
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI/6G/3L1
Manufacturer:
None
Injection Molding
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 4211
Manufacturer:
沙特基础工业公司
ECO Conforming
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
ECO Conforming
Recorded properties are for screening; verify source data and conditions.
Total 3608 materials | Scroll down for more