HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (8369 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
ABS+PMMA A 1000/506
制造商:
ALTECH
No Characteristics
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS+PC
制造商:
None
No Characteristics
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS TS 15/04
制造商:
无
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS E-LOOP 4105 MR
制造商:
Elix聚合物,S.L.
High impact or impact modified, Heat stabilized or stable to Europe, Asia Pacific, South and Central America, Near heat East/Africa
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to Europe, Asia Pacific, South and Central America, Near heat East/Africa
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABSPC 7901
制造商:
朗盛工业公司
High impact or impact modified
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABSPC 220 MoS2_AG
制造商:
巴达拉克
Injection Molding
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS E-LOOP H801 MR
制造商:
Elix聚合物有限公司
No Characteristics
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABSPC 9901
制造商:
None
High impact or impact modified
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABSpro™
制造商:
None
High impact or impact modified
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS+PC-GF
制造商:
LASTILAC 11 G/10
High impact or impact modified
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS+PC-GX20
制造商:
None
Flame retardant
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS+PC-GX30
制造商:
None
No Characteristics
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS+PC-GX10
制造商:
None
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS/PC 130 GF10 H UV
制造商:
Badalac
紫外线稳定, 耐热
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
紫外线稳定, 耐热
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS/PC 130 GF20 H UV
制造商:
None
No Characteristics
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS+PC-GX10
制造商:
None
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS/PA 310 TM-Z3 UV
制造商:
巴达拉克
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS+PA black 9005
制造商:
AUROblend®
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS/PA 320 TM-Z2
制造商:
Badalac
High impact or impact modified
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
ABS+PA6-GF8
制造商:
SCHULABLEND®
Injection Molding
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 8369 materials | Scroll down for more