HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1334 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
LX9043 NC
Manufacturer:
Heat-stabilized polyamide 12 molding compound with improved demoldability
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat-stabilized polyamide 12 molding compound with improved demoldability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID® L2124 PA12
Manufacturer:
High viscosity, plasticized, heat and light stabilized, high melt viscosity, good dimensional control, exceptional impact strength, low coefficient of friction, good chemical resistance, light stabilized or stable to light, U.V. stabilized or stable to weather, heat stabilized or stable to heat
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High viscosity, plasticized, heat and light stabilized, high melt viscosity, good dimensional control, exceptional impact strength, low coefficient of friction, good chemical resistance, light stabilized or stable to light, U.V. stabilized or stable to weather, heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID EX9200 PA12
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to North America, Europe, Asia Pacific, South and Central America weather, Heat stabilized or stable to heat
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to North America, Europe, Asia Pacific, South and Central America weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID LX9012 PA12
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID E55-S4 PA12
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID E55-S4 PA12
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID E47-S1 PA12
Manufacturer:
Natural Color, Ductile
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Natural Color, Ductile
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Ubesta 3030 JI9L
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
3012 U
Manufacturer:
Natural Color Heat stabilized or stable to heat
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Natural Color Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TERMIX D 431 PA12
Manufacturer:
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Rilsamid® AMNO TLD PA12
Manufacturer:
No Characteristics
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Rilsamid® AMNO TLD PA12
Manufacturer:
ARKEMA
No Characteristics
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Styx-12 PA12
Manufacturer:
Additive Manufacturing, Food contact, Food approval
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Additive Manufacturing, Food contact, Food approval
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RTP 200 F PA12
Manufacturer:
No Characteristics
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AESNO P40 TL
Manufacturer:
Rilsamid®
Plasticized, Designed for tube extrusion, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Plasticized, Designed for tube extrusion, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AESNO P40 TL
Manufacturer:
Rilsamid®
Plasticized, Designed for tube extrusion
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Plasticized, Designed for tube extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AESNO P401 TL
Manufacturer:
Rilsamid®
No Characteristics
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AESN BLACK P40 TL
Manufacturer:
Plasticized
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Plasticized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Rilsamid® AECHVO PA12
Manufacturer:
No Characteristics
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Explore CT PA PA12
Manufacturer:
No Characteristics
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 1334 materials | Scroll down for more