HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2203 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
ALCOM HM PC 1000 AG 14078
Manufacturer:
antibacterial acc. to ISO 22196:2011,permanent antibacterial,anti-microbial,contain no nanosilver,heat stabilised,good flow,processing stabilised
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
antibacterial acc. to ISO 22196:2011,permanent antibacterial,anti-microbial,contain no nanosilver,heat stabilised,good flow,processing stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD PC 1000 UV 14107 GY1213-14
Manufacturer:
translucent,light scattering,high light diffusion
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD2 PC 1000 15054 GY1096-15
Manufacturer:
translucent,light scattering,high light diffusion,good flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion,good flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LB2 PC 1000 17152 UV IM WT2083-07
Manufacturer:
impact modified,UV stabilised,contains recycled material
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified,UV stabilised,contains recycled material
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD PC 1000 18002 CC1001-18
Manufacturer:
Light Diffusing
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Light Diffusing
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD PC 1000 UV 17134 GY1129-17
Manufacturer:
translucent,light scattering,high light diffusion,easy release (demoulding),good flow,processing stabilised,UV stabilised
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion,easy release (demoulding),good flow,processing stabilised,UV stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD2 PC 1000 14008 WT1011-14
Manufacturer:
translucent,light scattering,high light diffusion,easy flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD2 PC 1000 17059 GY1051-17
Manufacturer:
high light transmission,light scattering
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high light transmission,light scattering
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD2 PC 1000 17149 UV WT2165-07
Manufacturer:
easy release (demoulding)
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
easy release (demoulding)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD PC 1000 UV 15112 GY1027-16
Manufacturer:
translucent,light scattering,high light diffusion,good flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion,good flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LB2 PC 1000 17153 WT2687-16
Manufacturer:
impact modified,UV stabilised,contains recycled material
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified,UV stabilised,contains recycled material
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LB2 PC 1000 17157 FR IM WT2083-07
Manufacturer:
impact modified,UV stabilised,contains recycled material,flame retardant
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified,UV stabilised,contains recycled material,flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD PC 1000 UV 15027 GY1044-15
Manufacturer:
translucent, light scattering, high light diffusion, good flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent, light scattering, high light diffusion, good flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD2 PC 1000 18033 WT2816-18
Manufacturer:
U.V. stabilized or stable to weather
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XANTAR™ C CM 546
Manufacturer:
Notched Impact
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Notched Impact
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC-X
Manufacturer:
light scattering,high light transmission,easy flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
light scattering,high light transmission,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC 740/4.19 WT1302-05LB
Manufacturer:
highly reflective,opaque,easy flow
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
highly reflective,opaque,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC-X_ALCOM PC 740/4.16 UV CC1321-08LG
Manufacturer:
high light transmission,light scattering
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high light transmission,light scattering
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM PC 740/40 FR UV WT1182-10LB
Manufacturer:
opaque,highly reflective
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
opaque,highly reflective
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM PC 740/4.2 UV GY1076-10LD
Manufacturer:
light scattering,high light transmission,easy flow,UV stabilised
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
light scattering,high light transmission,easy flow,UV stabilised
Recorded properties are for screening; verify source data and conditions.
Total 2203 materials | Scroll down for more