HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2203 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
ALCOM LD2 PC 1000 UV 14068 GY1159-14
Manufacturer:
translucent,light scattering,high light diffusion,easy flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD2 PC 1000 UV 15091 GY1138-15
Manufacturer:
translucent,good flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,good flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM PC 740/4 BL1411-07LD
Manufacturer:
light scattering,translucent,easy flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
light scattering,translucent,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC 730/3.1 UV WT1283-09LDM
Manufacturer:
low gloss,light scattering,high viscosity,extrusion grade
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low gloss,light scattering,high viscosity,extrusion grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC 740/4 BL1355-06LD
Manufacturer:
translucent,light scattering,good flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,good flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD2 PC 1000 UV 16032 WT1030-16
Manufacturer:
translucent,light scattering,high light diffusion,good flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion,good flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD2 PC 1000 UV 17002 WT1002-17
Manufacturer:
light scattering,high light transmission,good flow,UV stabilised,injection moulding grade
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
light scattering,high light transmission,good flow,UV stabilised,injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM PC 740/171 GY1127-05LD
Manufacturer:
translucent,light scattering,high light diffusion,easy flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD PC 1000 UV 14095 GY1198-14
Manufacturer:
translucent,high light diffusion,good flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,high light diffusion,good flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD2 PC 1000 UV 14013 CC1019-14
Manufacturer:
high light transmission,light scattering,good flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high light transmission,light scattering,good flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC-X ALCOM LD2 PC 1000 UV 14001 WT1007-14
Manufacturer:
translucent,light scattering,high light diffusion,UV stabilised,easy flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion,UV stabilised,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD PC 1000 UV 14096 GY1200-14
Manufacturer:
translucent,light scattering,high light diffusion,dependent on wall thickness,good flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion,dependent on wall thickness,good flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC-X_ALCOM LD2 PC 1000 14050 GY1118-14
Manufacturer:
translucent,light scattering,high light diffusion
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD2 PC 1000 UV 14019 WT1030-14
Manufacturer:
translucent,light scattering,high light diffusion
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC-X_ALCOM LD PC 1000 16102 BL1129-16
Manufacturer:
translucent,light scattering,high light diffusion,dependent on wall thickness
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion,dependent on wall thickness
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD2 PC 1000 14008 WT1009-14
Manufacturer:
translucent,light scattering,high light diffusion,easy flow
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD PC 1000 UV 15072 GY1121-15
Manufacturer:
translucent,light scattering,high light diffusion
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD PC 1000 UV 14012 GY1016-14
Manufacturer:
translucent,light scattering,high light diffusion
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
translucent,light scattering,high light diffusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC-X_ALCOM LB PC 1000 15022 WT1037-15
Manufacturer:
highly reflective,opaque,easy flow
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
highly reflective,opaque,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LD PC 1000 17052 WT1168-16
Manufacturer:
high light transmission,light scattering,easy release (demoulding),processing stabilised,injection moulding grade
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high light transmission,light scattering,easy release (demoulding),processing stabilised,injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Total 2203 materials | Scroll down for more