HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2571 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
Elastollan® B 98 A (TPU-ARES)
制造商:
None
good wear performance, good damping behavior and rebound elasticity at good flexibility at low temperature, good tensile strength
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good wear performance, good damping behavior and rebound elasticity at good flexibility at low temperature, good tensile strength
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan® C 85 A (TPU-ARES)
制造商:
None
high tensile strength, excellent tear strength, very good damping behavior, good rebound elasticity, very good wear performance, good flexibility at low temperature, resistance to hydrolysis
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high tensile strength, excellent tear strength, very good damping behavior, good rebound elasticity, very good wear performance, good flexibility at low temperature, resistance to hydrolysis
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan 598 A (TPU-ARES)
制造商:
巴斯夫聚氨酯有限公司
good abrasion resistance
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good abrasion resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan B 90 A (TPU-ARES)
制造商:
None
good wear performance, good damping behavior and rebound elasticity at good flexibility at low temperature, good tensile strength
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good wear performance, good damping behavior and rebound elasticity at good flexibility at low temperature, good tensile strength
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan® 598 A (TPU-ARES)
制造商:
None
good abrasion resistance
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good abrasion resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan 585 A (TPU-ARES)
制造商:
巴斯夫聚氨酯有限公司
透明,机械性能优秀,高耐磨性,可通过注塑成型
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
透明,机械性能优秀,高耐磨性,可通过注塑成型
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan 590 A (TPU-ARES)
制造商:
巴斯夫聚氨酯有限公司
No Characteristics
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan R 3001
制造商:
巴斯夫聚氨酯公司
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Desmopan 3868D (TPU-ARES+ABS)
制造商:
科思创
High impact or impact modified
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Desmopan 3868D (TPU-ARES+ABS)
制造商:
科思创德国公司
High impact or impact modified
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan R 3000 (TPU-ARES)-GF
制造商:
None
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan LP 9277
制造商:
巴斯夫聚氨酯有限公司
excellent colour fastness, easy flowing, detailed reproduction of surface structures, resistance to hydrolysis
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent colour fastness, easy flowing, detailed reproduction of surface structures, resistance to hydrolysis
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan L 785 A
制造商:
None
high transparent
Physical Properties
Density
1.12
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high transparent
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
R 3001
制造商:
None
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Desmopan 2795A SMP (TPU-ARES)
制造商:
None
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
3864D (TPU-ARES+ABS)
制造商:
Desmopan
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Desmopan 3864D (TPU-ARES+ABS)
制造商:
None
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan 560 D (TPU-ARES)
制造商:
巴斯夫聚氨酯有限公司
No Characteristics
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Elastollan® A C 85 A
制造商:
None
excellent colour fastness, easy flowing, detailed reproduction of surface structures, resistance to hydrolysis and low fogging values
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent colour fastness, easy flowing, detailed reproduction of surface structures, resistance to hydrolysis and low fogging values
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
2305 A TFE 15 (TPU+PTFE)-GF30
制造商:
RTP公司
Injection Molding
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 2571 materials | Scroll down for more