HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (11211 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PA66 15 GF 25 M BLK
制造商:
RTP
Heat stabilized or stable to heat
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF+MX_TECACOMP® PA66 TC black 4028
制造商:
恩斯inger化合物
Increased electrical conductivity, Thermally Conductive
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Thermally Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-(GF+Z)30
制造商:
None
Flame retardant
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-(GF+MX)40
制造商:
None
Injection Molding
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF+MX40_FORMPOLY N66GM40
制造商:
None
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF+MX38_LOXIAMID PA66 MR17GF21 HS2 04061
制造商:
None
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF+MX30 PENTAMID A GV15 MA15 H RC black
制造商:
Pentac聚合物公司
Heat stabilized or stable to heat
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF+MX30 PENTAMID A GV15 MA15 H RC black
制造商:
Pentac聚合物公司
Heat stabilized or stable to heat
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF+MX30 Vampamid 66 3054 V0
制造商:
None
Flame retardant
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF+MX30_POLIMID LUB A 1515 GFM Y10 KW
制造商:
None
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF+MX30_NA40 KK30 NL
制造商:
None
Thermal Stability, Chemical Resistance, General Chemical Resistance
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermal Stability, Chemical Resistance, General Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-(GF+MF)40
制造商:
RadiciGroup
heat stabilized
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF+MD40_SCHULAMID® 66 MKF 4015
制造商:
朗盛工业公司
Injection Molding
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF+GB30_Tislamid® B 30D03D05 R01
制造商:
Tisan 工程塑料有限公司
Injection Molding
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF+GB30_TEREZ® PA 6.6 7410 GF 10 GK 20
制造商:
特塑料
Medium viscosity, high rigidity, short molding cycle, balanced shrinkage characteristics, good removal
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium viscosity, high rigidity, short molding cycle, balanced shrinkage characteristics, good removal
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF+GB30_POLIMID A 1515 GFB_S
制造商:
None
No Characteristics
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-(GF+GB)30
制造商:
SLOVAMID®66 GF 20 GB 10
Low Warpage
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF+GB30_TEREZ® PA 6.6 7410 GF 10 GK 20
制造商:
特塑料
Medium viscosity, high rigidity, short molding cycle, balanced shrinkage characteristics, good removal
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium viscosity, high rigidity, short molding cycle, balanced shrinkage characteristics, good removal
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-(GF+GB)35
制造商:
None
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF+GB30 PENTAMID A GV20 GK10 E H black
制造商:
None
black
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
black
Recorded properties are for screening; verify source data and conditions.
Total 11211 materials | Scroll down for more