HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (27305 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PP LR 23 black
制造商:
None
No Characteristics
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W S2 50 I
制造商:
None
No Characteristics
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W70_WPC PP D70-153-2
制造商:
None
Extrusion Contains renewable resources
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Extrusion Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W
制造商:
ARBOFILL® Fichte natur
Injection Molding
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W70 H70-800-2
制造商:
None
Other Extrusion Contains renewable resources
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Other Extrusion Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W60_WPC PP H60-500-14
制造商:
None
Injection Molding
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W70 Beobase 70 PPH ext 116/0-400
制造商:
None
Other Extrusion Contains renewable resources
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Other Extrusion Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W50_WPC PP H50-800-2
制造商:
None
Other Extrusion Contains renewable resources
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Other Extrusion Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W60_WPC PP D60-153-2
制造商:
None
Other Extrusion Contains renewable resources
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Other Extrusion Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP7 A2 3
制造商:
None
Injection Molding
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W50_WPC PP H50-500-14
制造商:
None
Injection Molding Contains renewable resources
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W60_WPC PP H60-800-2
制造商:
None
Extrusion Contains renewable resources
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Extrusion Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W50_WPC PP H50-500-14-KS
制造商:
None
Injection Molding
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W50_Polywood S3 50 PP 10020
制造商:
None
No Characteristics
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W50_Polywood A7 50 PP 20004
制造商:
None
Injection Molding
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP7 A1
制造商:
None
Contains renewable resources
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W50_Polywood A3 50 PP 20002
制造商:
None
Injection Molding Contains renewable resources
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP 03-50-01
制造商:
None
Copolymer, Impact Copolymer
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer, Impact Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W50 FibraQ PP 02-50-01
制造商:
None
Copolymer, Impact Copolymer
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer, Impact Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-W50_Polywood A3 50 PP 20001
制造商:
None
Injection Molding
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 27305 materials | Scroll down for more