HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (5414 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
TRC 352T BLACK PP-T20
Manufacturer:
Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 411N R C11515
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TRC 452N G72828 PP-T20
Manufacturer:
Hostacom
Injection Molding Non Blooming, Scratch Resistant, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Non Blooming, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 352N G22749
Manufacturer:
Injection Molding Non Blooming, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Non Blooming, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 452N NAT
Manufacturer:
Injection Molding Non Blooming, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Non Blooming, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 452N C12546
Manufacturer:
Injection Molding Non Blooming, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Non Blooming, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 352N G22375
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to Europe weather
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to Europe weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 352N R C12507
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to Europe weather
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to Europe weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 352N E3 G62514
Manufacturer:
Injection Molding Non Blooming, Scratch Resistant, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Non Blooming, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hostacom TRC 352N E1 G72775
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to Europe weather
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to Europe weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 352N E3 C12507
Manufacturer:
Injection Molding Non Blooming, Scratch Resistant, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Non Blooming, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TRC 333N D82659 PP-T20
Manufacturer:
Injection Molding Low Emission, Scratch Resistant, Copolymer
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Low Emission, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TRC 352N E1 D62813
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to Europe weather
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to Europe weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 352N E1 G62514
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to Europe weather
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to Europe weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 352N C12546
Manufacturer:
Non Blooming, Scratch Resistant, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non Blooming, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 333N G72862
Manufacturer:
Injection Molding Low Emission, Scratch Resistant, Copolymer
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Low Emission, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 333N G62641
Manufacturer:
Injection Molding Low Emission, Scratch Resistant, Copolymer
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Low Emission, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TRC 333N D72645 PP-T20
Manufacturer:
Injection Molding Low Emission, Scratch Resistant, Copolymer
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Low Emission, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 333N D72643
Manufacturer:
Injection Molding Low Emission, Scratch Resistant, Copolymer
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Low Emission, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 104N G13031
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Total 5414 materials | Scroll down for more