HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (5414 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
EKC 133N M71413
Manufacturer:
Scratch Resistant, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CR 250 F/M C11462 PP-T16
Manufacturer:
Injection Molding Copolymer
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EKC 330N C12546
Manufacturer:
Injection Molding Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hostacom D M2 T32 351228 PP-T16
Manufacturer:
Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hostacom CR 250 F/M C12463 PP-T16
Manufacturer:
Copolymer
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EKC 330N D82513 PP-T16
Manufacturer:
Non Blooming, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non Blooming, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
14A4152
Manufacturer:
Flame retardant
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
14A4150 PP-T15
Manufacturer:
Flame retardant
Physical Properties
Density
1.31
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ISOFIL® RF 3403Y PP-T15
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T15_Hostacom TRC 411N C21290
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T15_Hostacom TRC 411N D13550
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T15_Hostacom TRC 411N G71260
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T15_Hostacom TRC 411N C11547
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XBR 169 G C12463
Manufacturer:
Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TRC 411Y C11543
Manufacturer:
Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T15_Hostacom TRC 411N G61309
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T15_Hostacom TRC 411N G82732
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TRC 411N D71500
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TRC 411N C11539 PP-T15
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to Europe weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to Europe weather, Color Stability, Ductile, Low Emission, Low Odor, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XBR 169 G C12509
Manufacturer:
Injection Molding Copolymer
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Total 5414 materials | Scroll down for more