HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (27305 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PP-MX40_POLYfill PPH T5040
制造商:
None
Homopolymer
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-MX40_POLYfill PPH T16040
制造商:
None
Homopolymer
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-MX40_POLYfill PPH K8040
制造商:
Polykemi AB
Injection Molding Homopolymer
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-MX40 PPH T15040
制造商:
None
Injection Molding Homopolymer
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-MX40_POLYfill PPH T2040
制造商:
None
Injection Molding Homopolymer
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-MX40_POLYfill PPH K5040
制造商:
None
Injection Molding Homopolymer
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP HIP8040F VT2
制造商:
None
No Characteristics
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-MX40_POLYfill PPC K5040 E30
制造商:
Polykemi AB
Injection Molding
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-MX40_POLYfill PPH T1040
制造商:
None
Injection Molding Homopolymer
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-MX40_POLYfill PPH K20040
制造商:
None
Homopolymer
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-MX40_POLYfill PPC T16040
制造商:
None
Injection Molding
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-MX40 POLYfill PP HIP8040 VT2
制造商:
None
Heat stabilized or stable to heat
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-MX40_POLYfill PPC K2040
制造商:
Polykemi AB
No Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-MX40 ISPLEN® PM460 AS
制造商:
None
Low Warpage, Homopolymer
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage, Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-MX40 P6240T-NA
制造商:
None
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-MX40_NR 90 black
制造商:
None
Black, Homopolymer, U.V. stabilized or stable to weather, Heat stabilized or stable to Europe
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Black, Homopolymer, U.V. stabilized or stable to weather, Heat stabilized or stable to Europe
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-MX40_NR 90 natural
制造商:
None
Homopolymer
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-MX40 EMOPLEN A CP 1710 E4
制造商:
None
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PP-MX38_POLYfill PPH T8038
制造商:
None
Injection Molding Homopolymer
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PPH1S20 M403-0022
制造商:
迪纳普伦
Injection Molding
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 27305 materials | Scroll down for more