HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (8647 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Hybrar™ 7125F
Manufacturer:
Styrene content: 20% Hydrogenated grades show an execllent miscibility with polypropylene. When blended, this results in exceptional transparency and clarity. Medical film and tubing film manufactured using HYBRAR™ is a more environmentally friendly alternative to flexible PVC due to the absence of harmful plasticizers.
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Styrene content: 20% Hydrogenated grades show an execllent miscibility with polypropylene. When blended, this results in exceptional transparency and clarity. Medical film and tubing film manufactured using HYBRAR™ is a more environmentally friendly alternative to flexible PVC due to the absence of harmful plasticizers.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DIAMALOY ENGINEERED ALLOYS TPE/ABS ST4600
Manufacturer:
Soft Feel
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Soft Feel
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DIAMALOY ENGINEERED ALLOYS TPE/ABS ST4600
Manufacturer:
Soft Feel
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Soft Feel
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VESTAMID® EX9200
Manufacturer:
Excellent toughness and flexibility even at low temperatures, Absence of plasticizers and therefore no plasticizer migration, Low density, Good chemical resistance, High dimensional stability and constant physical properties at changing environmental humidity due to low moisture absorption
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent toughness and flexibility even at low temperatures, Absence of plasticizers and therefore no plasticizer migration, Low density, Good chemical resistance, High dimensional stability and constant physical properties at changing environmental humidity due to low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Novodur® SBM-90
Manufacturer:
INEOS Styrolution
High surface quality, good impact strength
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High surface quality, good impact strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MS-NI
Manufacturer:
No Characteristics
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MS-CP
Manufacturer:
No Characteristics
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
MS-L2A
Manufacturer:
No Characteristics
Physical Properties
Density
1.18
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2300 W Clear
Manufacturer:
Absolan
Injection Molding Copolymer
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2300 Clear
Manufacturer:
Absolan
Injection Molding Copolymer
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RTP 2000 A-670 (PSU+ABS)
Manufacturer:
No Characteristics
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
K-Resin® KR21
Manufacturer:
Reinforcement of Recycled ABS and HIPS
Physical Properties
Density
0.99
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Reinforcement of Recycled ABS and HIPS
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
S5000
Manufacturer:
HIGH MOLECULAR WEIGHT PVC K-Value 99 - ISO 1628-2 Size Analysis >250µm =<2,5 % ISO 13320-1 Size Analysis <63µm =<4 % ISO 13320-1 Volatile content =<0,3 % ISO 1269 Plasticizer absorption 42 % ISO 4608 Residual Vinyl Chloride <1 ppm ISO 24538
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
HIGH MOLECULAR WEIGHT PVC K-Value 99 - ISO 1628-2 Size Analysis >250µm =<2,5 % ISO 13320-1 Size Analysis <63µm =<4 % ISO 13320-1 Volatile content =<0,3 % ISO 1269 Plasticizer absorption 42 % ISO 4608 Residual Vinyl Chloride <1 ppm ISO 24538
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2000 A-670
Manufacturer:
No Characteristics
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-H A 1000/120 UV GY1076-12LWA
Manufacturer:
ALTECH
laser absorbing,impact modified,injection moulding grade,UV stabilised
Physical Properties
Density
0.92
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
laser absorbing,impact modified,injection moulding grade,UV stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
OMC0E
Manufacturer:
high dielectric constant, low dissipation factor, good flame and chemical resistance, low moisture absorption
Physical Properties
Density
2.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high dielectric constant, low dissipation factor, good flame and chemical resistance, low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
OMC0D
Manufacturer:
high dielectric constant, low dissipation factor, good flame and chemical resistance, low moisture absorption
Physical Properties
Density
2.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high dielectric constant, low dissipation factor, good flame and chemical resistance, low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound OMC0E
Manufacturer:
LNP™
high dielectric constant, low dissipation factor, good flame and chemical resistance, low moisture absorption
Physical Properties
Density
2.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high dielectric constant, low dissipation factor, good flame and chemical resistance, low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound OMC0D
Manufacturer:
high dielectric constant, low dissipation factor, good flame and chemical resistance, low moisture absorption
Physical Properties
Density
2.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high dielectric constant, low dissipation factor, good flame and chemical resistance, low moisture absorption
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
OFM46
Manufacturer:
high stiffness and strength, excellent dimensional stability and warpage control, good flame and chemical resistance, low coefficient of thermal expansion and moisture absorption
Physical Properties
Density
1.77
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high stiffness and strength, excellent dimensional stability and warpage control, good flame and chemical resistance, low coefficient of thermal expansion and moisture absorption
Recorded properties are for screening; verify source data and conditions.
Total 8647 materials | Scroll down for more