HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (5414 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PH 32 T 20
Manufacturer:
Homopolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PH 52 T 20
Manufacturer:
SLOVALEN
Thermal Stability, Homopolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermal Stability, Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PH 56 T 20 FRD 1
Manufacturer:
Flame retardant
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20 RTP 128 HI
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20 RTP 128
Manufacturer:
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20 SCOLEFIN® 52 T 25
Manufacturer:
Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20 RAVAPLEN® 72 T 45-9 UV E25057
Manufacturer:
ECO compound, U.V. stabilized or stable to weather, Copolymer
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
ECO compound, U.V. stabilized or stable to weather, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP210 T20
Manufacturer:
No Characteristics
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPC T20-100
Manufacturer:
Scratch Resistant
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_POLYFORT® FIPP 20 T LE K1832
Manufacturer:
low emission, increased impact strength, increased scratch resistance
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low emission, increased impact strength, increased scratch resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_POLYFORT® FPP 3454F
Manufacturer:
Copolymer
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_POLYFORT® FXP 2779U
Manufacturer:
Injection Molding
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20 POLYFORT® FPP 1006U
Manufacturer:
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_POLYFORT® FPP 1908E
Manufacturer:
Copolymer, Impact Copolymer
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer, Impact Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Polimaxx 2311KX TA4
Manufacturer:
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20 Polimaxx 1111NX TA4
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_POLIFOR® E30 TR20 UV
Manufacturer:
U.V. stabilized or stable to weather
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Moplen QCP840P Black
Manufacturer:
Copolymer, Impact Copolymer
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer, Impact Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20-MM-PP HI 21 TV20_AG
Manufacturer:
Homopolymer
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPC-20T Nat
Manufacturer:
Maxxam™
Injection Molding Copolymer
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Copolymer
Recorded properties are for screening; verify source data and conditions.
Total 5414 materials | Scroll down for more