HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (5414 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PP-T20 MAFILL® CR HT 5344 H
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.08
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Maxxam™ 34-1520 SSM TFPP
Manufacturer:
Homopolymer
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PD 2201
Manufacturer:
Maxxam™
Injection Molding, Building Construction, General Purpose
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Building Construction, General Purpose
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20 MAFILL® CR CT 5344
Manufacturer:
Copolymer
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20 ISOFIL® SW 4909U
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20 ISOFIL® SV 4118X
Manufacturer:
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20 ISOFIL® MV 4205Y
Manufacturer:
U.V. stabilized or stable to weather, Scratch Resistant, Copolymer
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_ISOFIL® MC 4214Y
Manufacturer:
Special Characteristics
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Characteristics
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20 INNOPOL® CS 3-7120
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20 ISOFIL® PF 4102H
Manufacturer:
Heat stabilized or stable to heat, Ductile, Low Emission, Homopolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat, Ductile, Low Emission, Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_ISOFIL® H 20 TP X
Manufacturer:
Injection Molding
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20 INNOPOL® CS 1-5120 LH
Manufacturer:
Thermal Stability, Homopolymer
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermal Stability, Homopolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CS 1-7120
Manufacturer:
Injection Molding, Profile Extrusion, Sheet Extrusion
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Profile Extrusion, Sheet Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 787N E1 G81493
Manufacturer:
Regional Availability Scratch Resistant, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Regional Availability Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 787N E1 D71555
Manufacturer:
Injection Molding, Automotive
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Automotive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 787N E1 G14008
Manufacturer:
Scratch Resistant, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom X 43233 S63 100051
Manufacturer:
Non Blooming, Copolymer
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non Blooming, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 787N E1 G21373
Manufacturer:
Scratch Resistant, Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Scratch Resistant, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 787N E C11323
Manufacturer:
Copolymer
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP-T20_Hostacom TRC 453N E C12628
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Total 5414 materials | Scroll down for more