HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (5414 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA6+PP-GF30_AKROMID® B3 GF 30 1 L natural
Manufacturer:
Akro-Plastic GmbH
Heat stabilized or stable to heat
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PENTALLOY BP CVB10 H black (PA6+PP)-(CF+GB)10
Manufacturer:
No Characteristics
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AKROMID® B3 GK 30 1 L black
Manufacturer:
Heat stabilized
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Xyron™ AG211 (PA*+PPE)-GF10
Manufacturer:
Injection Molding
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 9340M E/P
Manufacturer:
Nucleated, Thermal Stability, Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Nucleated, Thermal Stability, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 8440L (EPC31HR) E/P
Manufacturer:
Injection Molding Nucleated, Thermal Stability, Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Nucleated, Thermal Stability, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
8400K E/P
Manufacturer:
Thermal Stability, Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermal Stability, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 8548S (EPH71HA) E/P
Manufacturer:
Injection Molding Nucleated, Thermal Stability, Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Nucleated, Thermal Stability, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 8548R (EPV31RA) E/P
Manufacturer:
Injection Molding Nucleated, Thermal Stability, Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Nucleated, Thermal Stability, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 8548R (EPV31RA) E/P
Manufacturer:
Injection Molding Nucleated, Thermal Stability, Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Nucleated, Thermal Stability, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 8380T E/P
Manufacturer:
Injection Molding, Thermal Stability, Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Thermal Stability, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
9236N E/P
Manufacturer:
Oxidation Resistance, Thermal Stability, Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Oxidation Resistance, Thermal Stability, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 8340K E/P
Manufacturer:
Nucleated, Thermal Stability, Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Nucleated, Thermal Stability, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 8300R E/P
Manufacturer:
Thermal Stability, Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermal Stability, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 8300J E/P
Manufacturer:
Thermal Stability, Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermal Stability, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 7548V (EPN31MA)
Manufacturer:
Injection Molding Nucleated, Thermal Stability, Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Nucleated, Thermal Stability, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 7648H E/P
Manufacturer:
Profile Extrusion, Other Extrusion, Nucleated, Thermal Stability, Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Profile Extrusion, Other Extrusion, Nucleated, Thermal Stability, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 4348S E/P
Manufacturer:
Pellets
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Pellets
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 7400J E/P
Manufacturer:
Thermal Stability, Copolymer
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermal Stability, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PP 4445S E/P
Manufacturer:
Anti-static Packaging
Physical Properties
Density
0.9
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Anti-static Packaging
Recorded properties are for screening; verify source data and conditions.
Total 5414 materials | Scroll down for more