HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Elastollan® B 64 D
Manufacturer:
good wear performance, good damping behavior and rebound elasticity at good flexibility at low temperature, good tensile strength
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good wear performance, good damping behavior and rebound elasticity at good flexibility at low temperature, good tensile strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan B 85 A
Manufacturer:
good wear performance, good damping behavior and rebound elasticity at good flexibility at low temperature, good tensile strength
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good wear performance, good damping behavior and rebound elasticity at good flexibility at low temperature, good tensile strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan 598 A
Manufacturer:
good abrasion resistance
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good abrasion resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan® B 90 A
Manufacturer:
good wear performance, good damping behavior and rebound elasticity at good flexibility at low temperature, good tensile strength
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good wear performance, good damping behavior and rebound elasticity at good flexibility at low temperature, good tensile strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan 890 A FC
Manufacturer:
good wear performance, good damping behavior and good rebound elasticity, high tensile strength, good resistance to tear propagation
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good wear performance, good damping behavior and good rebound elasticity, high tensile strength, good resistance to tear propagation
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan B 64 D
Manufacturer:
No Characteristics
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan 565 AP
Manufacturer:
plasticized, with excellent mechanical properties, phthalate-free
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
plasticized, with excellent mechanical properties, phthalate-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan 585 A
Manufacturer:
transparent, with excellent mechanical properties and a high abrasion resistance, processable by injection moulding
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
transparent, with excellent mechanical properties and a high abrasion resistance, processable by injection moulding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan® B 60 D
Manufacturer:
good wear performance, good damping behavior and rebound elasticity, good flexibility at low temperature, good tensile strength
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good wear performance, good damping behavior and rebound elasticity, good flexibility at low temperature, good tensile strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan® B 60 D
Manufacturer:
good wear performance, good damping behavior and rebound elasticity, good flexibility at low temperature, good tensile strength
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good wear performance, good damping behavior and rebound elasticity, good flexibility at low temperature, good tensile strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan B 80 A
Manufacturer:
good wear performance, good damping behavior and rebound elasticity at good flexibility at low temperature, good tensile strength
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good wear performance, good damping behavior and rebound elasticity at good flexibility at low temperature, good tensile strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan® B 85 A
Manufacturer:
good wear performance, good damping behavior and rebound elasticity at good flexibility at low temperature, good tensile strength
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good wear performance, good damping behavior and rebound elasticity at good flexibility at low temperature, good tensile strength
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan 560 D
Manufacturer:
good abrasion resistance
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good abrasion resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan 585 A
Manufacturer:
transparent, with excellent mechanical properties and a high abrasion resistance, processable by injection moulding
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
transparent, with excellent mechanical properties and a high abrasion resistance, processable by injection moulding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan 590 A
Manufacturer:
good abrasion resistance
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good abrasion resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan® 598 A
Manufacturer:
good abrasion resistance
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good abrasion resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan 560 D
Manufacturer:
good abrasion resistance
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
good abrasion resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan® R 2000
Manufacturer:
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan® R 1001
Manufacturer:
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Elastollan® R 3000
Manufacturer:
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very good impact strength, high stiffness combined with good strain, low thermal expansion coefficient equivalent to metal (Al), low mould shrinkage, ease of paintability
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more