HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1445 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
SKYPET® BR PET
Manufacturer:
Food contact, Medical Grade, US Pharmacopeia Class VI
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Food contact, Medical Grade, US Pharmacopeia Class VI
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1407 TFE 15 (PESU+PTFE)-GF40
Manufacturer:
High thermal stability, good chemical resistance
Physical Properties
Density
1.81
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High thermal stability, good chemical resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEK-GF15_G-PAEK™ 1215GF
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEKEKK-GF30_VICTREX® ST™ 45GL30
Manufacturer:
No Characteristics
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PW1000
Manufacturer:
ULTEM™
unreinforced amorphous polyetherimide, high glass transition temperature (Tg) of 217°C, potable water certifications, food contact compliance, excellent mechanical and dimensional properties, very good hydrolytic and chemical resistance, inherently flame retardant, RoHS compliant
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
unreinforced amorphous polyetherimide, high glass transition temperature (Tg) of 217°C, potable water certifications, food contact compliance, excellent mechanical and dimensional properties, very good hydrolytic and chemical resistance, inherently flame retardant, RoHS compliant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin HU1100
Manufacturer:
ECO Conforming, biocompatible (ISO 10993 or USP Class VI), food contact compliant, Steam, Gamma, EtO, and E-beam sterilizable
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
ECO Conforming, biocompatible (ISO 10993 or USP Class VI), food contact compliant, Steam, Gamma, EtO, and E-beam sterilizable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HU1010
Manufacturer:
ULTEM™
Excellent mechanical, electrical and dimensional properties up to high temperatures, very good chemical resistance, inherently flame retardant, biocompatible, food compliance, steam-, peroxide-, gamma-, EtO-, UV-C- and E-beam resistance for repeated sterilization cycles
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent mechanical, electrical and dimensional properties up to high temperatures, very good chemical resistance, inherently flame retardant, biocompatible, food compliance, steam-, peroxide-, gamma-, EtO-, UV-C- and E-beam resistance for repeated sterilization cycles
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 1110F
Manufacturer:
Enhanced flow
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Enhanced flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1110F
Manufacturer:
ULTEM™
Enhanced flow, ECO Conforming, US FDA and EU Food Contact compliant, NSF 51 listing, UL Yellow Card Link E121562-101048269
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Enhanced flow, ECO Conforming, US FDA and EU Food Contact compliant, NSF 51 listing, UL Yellow Card Link E121562-101048269
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 1010UCL
Manufacturer:
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1010F
Manufacturer:
high glass transition temperature (Tg) of 217°C, improved flow and global food compliance (FDA, CN, EC), low staining, microwave transparent and cold to the touch solutions, very good chemical resistance, inherently flame retardant
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high glass transition temperature (Tg) of 217°C, improved flow and global food compliance (FDA, CN, EC), low staining, microwave transparent and cold to the touch solutions, very good chemical resistance, inherently flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1000R
Manufacturer:
ULTEM™
unreinforced amorphous polyetherimide (PEI) resin, high glass transition temperature (Tg) of 217°C, excellent mechanical, electrical and dimensional properties up to high temperatures, very good chemical resistance, inherently flame retardant, RoHS compliant, available in opaque colors
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
unreinforced amorphous polyetherimide (PEI) resin, high glass transition temperature (Tg) of 217°C, excellent mechanical, electrical and dimensional properties up to high temperatures, very good chemical resistance, inherently flame retardant, RoHS compliant, available in opaque colors
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 1010M
Manufacturer:
High glass transition temperature, Improved flow, Reduced internal mold release, Excellent mechanical, electrical and dimensional properties, Very good chemical resistance, RoHS compliant, Available in opaque colors
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High glass transition temperature, Improved flow, Reduced internal mold release, Excellent mechanical, electrical and dimensional properties, Very good chemical resistance, RoHS compliant, Available in opaque colors
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 1010AR
Manufacturer:
high glass transition temperature, improved flow, internal mold release, excellent mechanical, electrical and dimensional properties, very good chemical resistance, RoHS compliant, available in opaque and transparent colors
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high glass transition temperature, improved flow, internal mold release, excellent mechanical, electrical and dimensional properties, very good chemical resistance, RoHS compliant, available in opaque and transparent colors
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1000F3SP
Manufacturer:
ULTEM™
transparent amber colored once processed
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
transparent amber colored once processed
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1000F3SP
Manufacturer:
unreinforced amorphous polyetherimide (PEI)
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
unreinforced amorphous polyetherimide (PEI)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2199 X 130019 A
Manufacturer:
Injection Molding
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RTP 2100 PEI
Manufacturer:
Injection Molding
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Compound EX02598C
Manufacturer:
LNP™ STAT-KON™
Electrically Conductive
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EX11402R
Manufacturer:
LNP™ STAT-KON™
Electrically Conductive, Radar Absorbing
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Radar Absorbing
Recorded properties are for screening; verify source data and conditions.
Total 1445 materials | Scroll down for more