HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (3608 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PEI+PTFE-GF30_LNP™ LUBRICOMP™ Compound EFL36
Manufacturer:
Wear Resistant
Physical Properties
Density
1.62
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2183 TFE 10
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI+PTFE-CF10 RTP 2181 TFE 5
Manufacturer:
Injection Molding
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEI+PTFE-CF30_LNP™ LUBRICOMP™ Compound ECL36
Manufacturer:
Wear Resistant, Electrically Conductive
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Electrically Conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2181 TFE 15 SI 2
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2181 TFE 10
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Compound EX07311P
Manufacturer:
LNP™ STAT-KON™
LNP Clean Compounding Technology, Electrically Conductive, Dimensional Stability, Wear Resistant
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
LNP Clean Compounding Technology, Electrically Conductive, Dimensional Stability, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2181 HF TFE 15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ULTEM™ Resin 4000 - Europe
Manufacturer:
Glass fiber, PTFE, and Graphite filled, standard flow
Physical Properties
Density
1.68
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Glass fiber, PTFE, and Graphite filled, standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEEK+PTFE VICTREX® PEEK 450FE20
Manufacturer:
Victrex plc
Tribologic Grade, Chemical Resistance, General Chemical Resistance
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade, Chemical Resistance, General Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2200 HF TFE 5
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2200 HF TFE 15
Manufacturer:
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2200 LF TFE 15
Manufacturer:
Injection Molding
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEEK 450FE20
Manufacturer:
Victrex plc
No Characteristics
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PEEK 450 TF10 blue 3905
Manufacturer:
Injection Molding
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2200 LF TFE 5
Manufacturer:
Injection Molding
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2200 HF TFE 5
Manufacturer:
Injection Molding
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2200 HF TFE 20
Manufacturer:
RTP
No Characteristics
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
2200 LF TFE 5
Manufacturer:
Injection Molding
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KD2530-NT
Manufacturer:
Pellets
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Pellets
Recorded properties are for screening; verify source data and conditions.
Total 3608 materials | Scroll down for more