HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (1225 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
UX08325
Manufacturer:
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, SMT Process capable
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, SMT Process capable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound UX06032
Manufacturer:
LNP™
Non-Brominated & Non-Chlorinated Flame Retardant, Heat Stabilized
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Non-Brominated & Non-Chlorinated Flame Retardant, Heat Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
UX08319
Manufacturer:
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Dielectric Properties
Physical Properties
Density
2.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Dielectric Properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
UF0069S
Manufacturer:
LNP™ THERMOCOMP™
Heat Stabilized
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FRIANYL® XT4 GF30 V0I
Manufacturer:
Celanese
Specifically designed for electrical and electronic applications that require high thermal, peak and continuous resistance together with compliance with the most stringent safety requirements, this compound is also easy to process with excellent aesthetic results. Suitable for components that need to withstand the reflow soldering process (SMT).
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Specifically designed for electrical and electronic applications that require high thermal, peak and continuous resistance together with compliance with the most stringent safety requirements, this compound is also easy to process with excellent aesthetic results. Suitable for components that need to withstand the reflow soldering process (SMT).
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
UF0067W
Manufacturer:
LNP™ THERMOCOMP™
Hot Water Moldable
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hot Water Moldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
G362 H(+)
Manufacturer:
Ginar Technology Co.,Ltd.
Heat stabilized or stable to heat
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
6130GHA
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.56
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound UF0069S
Manufacturer:
LNP™
Heat Stabilized
Physical Properties
Density
1.65
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound UX08319
Manufacturer:
LNP™
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Dielectric Properties
Physical Properties
Density
2.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Improved Plating Surface and Mechanical Performance suitable for Laser Direct Structuring (LDS) applications, Improved Dielectric Properties
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ForTii® Eco E11
Manufacturer:
Good Flow, Halogen free and free of red phosphorous, Certified V-0 at 0.15mm, Suitable for SMT processes, High electrical RTI rating, Eco-friendly, Flame retardant, Halogen-free, Phosphorus-free, Contains renewable resources
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Flow, Halogen free and free of red phosphorous, Certified V-0 at 0.15mm, Suitable for SMT processes, High electrical RTI rating, Eco-friendly, Flame retardant, Halogen-free, Phosphorus-free, Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ForTii® WX11-FC
Manufacturer:
Food Contact Quality, Drinking Water Grade
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Food Contact Quality, Drinking Water Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FRIANYL® XT4 GF30 V0I BK 9005/D
Manufacturer:
Flame retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ForTii® TX1
Manufacturer:
Electro-friendly, Halogen free and free of red phosphorous
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electro-friendly, Halogen free and free of red phosphorous
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ForTii® JTX2
Manufacturer:
ISO 1043 PPA-GF30
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
ISO 1043 PPA-GF30
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ForTii® LDS51B
Manufacturer:
Laser Direct Structuring (LDS)
Physical Properties
Density
1.58
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Laser Direct Structuring (LDS)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ForTii® F11
Manufacturer:
Electro-friendly, Halogen free and free of red phosphorous
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electro-friendly, Halogen free and free of red phosphorous
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FRIANYL® XT4 GF30 V0I BK 9005/CC
Manufacturer:
Flame retardant, Heat stabilized
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ForTii® K11
Manufacturer:
Good Flow, Electro-friendly
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Flow, Electro-friendly
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CELANYL® XT1 GF30 BK 9005WFA
Manufacturer:
Heat stabilized or stable to heat, Creep Resistance, Chemical Resistance, General Chemical Resistance
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat, Creep Resistance, Chemical Resistance, General Chemical Resistance
Recorded properties are for screening; verify source data and conditions.
Total 1225 materials | Scroll down for more