HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (11211 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
F662E33 PA66-GF33
制造商:
None
No Characteristics
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
5133-02 PA66-GF33
制造商:
尼龙酰胺
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF33_NEVIMID 66 G33 ST H
制造商:
None
No Characteristics
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
NYLENE® 5133 HRL PA66-GF33
制造商:
None
Hydrolytically Stable
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
5133-04 BK
制造商:
尼龙酰胺
Injection Molding
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF33_NEVIMID 66 A G33 ST H
制造商:
None
High impact or impact modified
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Matrixx F663E33 PA66-GF33
制造商:
None
No Characteristics
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LEONA™ 1402G PA66-GF33
制造商:
旭化成
Heat stabilized
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUMID GP2339B(W) PA66-GF33
制造商:
LG化学
No Characteristics
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUMID GP2339B(W) PA66-GF33
制造商:
LG化学
No Characteristics
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LEONA™ 90G33 PA66-GF33
制造商:
旭化成
Injection Molding
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LEONA™ 14G33 PA66-GF33
制造商:
旭化成
No Characteristics
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
KDG1133CR PA66-GF33
制造商:
科普拉
Hydrolytically Stable
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Hydrolytically Stable
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUMID GP2330B(W) PA66-GF33
制造商:
LG化学
No Characteristics
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LEONA™ 1300G PA66-GF33
制造商:
旭化成
Creep Resistance, Fatigue Resistance
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Creep Resistance, Fatigue Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66 GF33 HS1 04042
制造商:
None
High impact or impact modified, Heat stabilized or stable to North America, Europe, Asia Pacific
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to North America, Europe, Asia Pacific
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
HiDura™ MED AG33 NT0862
制造商:
None
Excellent strength & stiffness for structural needs
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent strength & stiffness for structural needs
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66-GF33 FORMPOLY N66GF33HSLR
制造商:
None
Low Odor
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Odor
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
N1033L PA66-GF33
制造商:
None
Injection Molding, Automotive
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Automotive
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
N1033THL
制造商:
Hylon
Heat stabilized
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Total 11211 materials | Scroll down for more