HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Hytrel® 4069
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures, good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures, good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® 5526
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents, plasticiser free, good melt stability, heat stabilised, flame retardant, food contact compliant, blow molding and extrusion grades, black pigments, UV protection additives, heat stabilisers, and flame retardants, medium modulus, non-discoloring stabilizer, high flow properties, seals, packing and gaskets; gears and bearings
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents, plasticiser free, good melt stability, heat stabilised, flame retardant, food contact compliant, blow molding and extrusion grades, black pigments, UV protection additives, heat stabilisers, and flame retardants, medium modulus, non-discoloring stabilizer, high flow properties, seals, packing and gaskets; gears and bearings
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® 5555HS
Manufacturer:
platable, light stabilized or stable to light, heat stabilized or stable to heat
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
platable, light stabilized or stable to light, heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® 7246HS BK320
Manufacturer:
No Characteristics
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® 8238
Manufacturer:
No Characteristics
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® 5553FG NC010
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® 4068
Manufacturer:
plasticiser free
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
plasticiser free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® 4068FG
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents, plasticiser free, good melt stability, typically used in demanding applications
Physical Properties
Density
1.11
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents, plasticiser free, good melt stability, typically used in demanding applications
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® 4056
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents, plasticiser free
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents, plasticiser free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
3078
Manufacturer:
Platable, High impact or impact modified, Light stabilized or stable to light, Heat stabilized or stable to heat
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Platable, High impact or impact modified, Light stabilized or stable to light, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® 4056P
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® 4053FGF NC010
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents, plasticiser free, good melt stability, suitable for extrusion and injection molding processes, FOOD CONTACT, heat stabilised, flame retardant, food contact compliant, blow molding and extrusion grades, black pigments, UV protection additives, heat stabilisers, and flame retardants
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents, plasticiser free, good melt stability, suitable for extrusion and injection molding processes, FOOD CONTACT, heat stabilised, flame retardant, food contact compliant, blow molding and extrusion grades, black pigments, UV protection additives, heat stabilisers, and flame retardants
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® 4053FG NC010
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HERAFLEX E 4718 1000 NT
Manufacturer:
Low Modulus, Nominal Shore D/15s 43. Natural color
Physical Properties
Density
1.15
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Modulus, Nominal Shore D/15s 43. Natural color
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® 3078 BK176
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HERAFLEX E 3918 1000 NT
Manufacturer:
No Characteristics
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® 4039
Manufacturer:
Exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures, good retention of properties at elevated temperatures, resistance to many industrial chemicals, oils and solvents, plasticiser free
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures, good retention of properties at elevated temperatures, resistance to many industrial chemicals, oils and solvents, plasticiser free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HERAFLEX E 6521 1000 NT
Manufacturer:
RadiciGroup
Medium-high Modulus, Nominal Shore D/15s 57, Natural color
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Medium-high Modulus, Nominal Shore D/15s 57, Natural color
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® 21UV
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Edgetek™ XT X XT 1001 Natural
Manufacturer:
No Characteristics
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more