HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
Hytrel® 30HS
Manufacturer:
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Physical Properties
Density
1.1
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HERAFLEX E 7722 1000 NT
Manufacturer:
RadiciGroup
High Modulus, Nominal Shore D/15s 69, Natural color
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Nominal Shore D/15s 69, Natural color
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ECOZEN® YH 101
Manufacturer:
High impact or impact modified, Transparent
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
HERAFLEX E 2517 1000 NT
Manufacturer:
RadiciGroup
Lowest Modulus, Nominal Shore D/15s 22, Natural colour
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Lowest Modulus, Nominal Shore D/15s 22, Natural colour
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hytrel® 3046 NC010
Manufacturer:
Excellent toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures, good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures, good retention of properties at elevated temperatures, resists many industrial chemicals, oils and solvents
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPC
Manufacturer:
No Characteristics
Physical Properties
Density
1.14
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ECOZEN® YF 400
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat, Transparent
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ECOZEN® YH 300
Manufacturer:
High impact or impact modified, Transparent
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Edgetek™ XT X XT 1000 Natural
Manufacturer:
TPC
High impact or impact modified
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ECOZEN® YM 050
Manufacturer:
TPC_ECOZEN® YM 050
High impact or impact modified, Heat stabilized or stable to heat, Contains renewable resources, Food contact, Food approval, Drinking water contact, Drinking water contact
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat, Contains renewable resources, Food contact, Food approval, Drinking water contact, Drinking water contact
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ECOZEN® YH 400
Manufacturer:
High impact or impact modified, Transparent
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ECOZEN® YM 101
Manufacturer:
High impact or impact modified, Heat stabilized or stable to Contains renewable resources, Food contact, Food approval, General Chemical Resistance, Stain Resistance
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to Contains renewable resources, Food contact, Food approval, General Chemical Resistance, Stain Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ECOZEN® YF 301
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat, Transparent
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ECOZEN® YH 301
Manufacturer:
High impact or impact modified, Transparent
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ECOZEN® YM 300
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat, Contains renewable resources, Food contact, Food approval, Drinking water contact, Drinking water contact
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat, Contains renewable resources, Food contact, Food approval, Drinking water contact, Drinking water contact
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ECOZEN® YH 401
Manufacturer:
High impact or impact modified, Transparent
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ECOZEN® YM 401
Manufacturer:
High impact or impact modified, Heat stabilized or stable to Contains renewable resources, Food contact, Food approval
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to Contains renewable resources, Food contact, Food approval
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ECOZEN® YH 051
Manufacturer:
High impact or impact modified, Transparent
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Transparent
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ECOZEN® YM 301
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ECOZEN® YM 400
Manufacturer:
High impact or impact modified, Heat stabilized or stable to heat, Contains renewable resources, Food contact, Food approval, Drinking water contact, Drinking water contact NSF 61
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Heat stabilized or stable to heat, Contains renewable resources, Food contact, Food approval, Drinking water contact, Drinking water contact NSF 61
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more