HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (3608 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PBT 700/8 GF15 PTFE15 (PBT+PTFE)-GF15
Manufacturer:
improved sliding / wear,high stiffness,good hydrolysis resistant,heat stabilised
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,high stiffness,good hydrolysis resistant,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1001 TFE 15 Z (PBT+PTFE)-GF10
Manufacturer:
Injection Molding, Food contact, Food approval FDA 21 CFR
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Food contact, Food approval FDA 21 CFR
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1002 TFE 15 Z (PBT+PTFE)-GF15
Manufacturer:
Injection Molding, Food contact, Food approval FDA 21 CFR
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Food contact, Food approval FDA 21 CFR
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ LUBRICOMP™ Compound WFL34H
Manufacturer:
Wear Resistant, Healthcare
Physical Properties
Density
1.59
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Healthcare
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Denilub B 20G 3TF (PBT+PTFE)-GF20
Manufacturer:
Lubricants
Physical Properties
Density
1.55
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Lubricants
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound WBL36L - Americas (PBT+PTFE)-GB30
Manufacturer:
LNP™
Wear Resistant, Low Extractables
Physical Properties
Density
1.69
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Low Extractables
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1002 TFE 15 (PBT+PTFE)-GF15
Manufacturer:
No Characteristics
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1002 TFE 10 (PBT+PTFE)-GF15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUVOCOM 1850-7581 (PBT+PTFE)-CF
Manufacturer:
No Characteristics
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM PBT 700/1.5 HR GF15 PTFE15
Manufacturer:
improved sliding / wear,high stiffness,good hydrolysis resistant,heat stabilised
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,high stiffness,good hydrolysis resistant,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUVOCOM 1850-7784 (PBT+PTFE)-(GF+GB)
Manufacturer:
No Characteristics
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1002 TFE 15 SI 2 (PBT+PTFE)-GF15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1001 GB 15 TFE 5 (PBT+PTFE)-GB15
Manufacturer:
No Characteristics
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1085 TFE 15 (PBT+PTFE)-CF30
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound WCL36 (PBT+PTFE)-CF30
Manufacturer:
LNP™
Electrically Conductive, Wear Resistant
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
WAL34
Manufacturer:
LNP™ LUBRICOMP™
Internally Lubricated, Wear Resistant
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Internally Lubricated, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PBT/6G/2L3 (PBT+PTFE+SI)-GF30
Manufacturer:
Lubricants
Physical Properties
Density
1.57
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Lubricants
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1082 TFE 15 (PBT+PTFE)-CF15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1085 TFE 13 SI 2 (PBT+PTFE+SI)-CF30
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PBT/4L3 (PBT+PTFE+SI)
Manufacturer:
No Characteristics
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 3608 materials | Scroll down for more