HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
DI01A PSAC
Manufacturer:
No Characteristics
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Envifill® HG30 PSAC
Manufacturer:
Biodegradable, Food contact, Food approval 10/2011, Compostable
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Biodegradable, Food contact, Food approval 10/2011, Compostable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FB173
Manufacturer:
Envifill®
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Envifill® M20 PSAC
Manufacturer:
Bio-renewable, Compostable, No plasticizers
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Bio-renewable, Compostable, No plasticizers
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Envifill® F25H20 PSAC
Manufacturer:
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable ISO 13432 (Producer), Delivery form Compostable ISO 13432 (Certificate)
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable ISO 13432 (Producer), Delivery form Compostable ISO 13432 (Certificate)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Envifill® F30 PSAC
Manufacturer:
No Characteristics
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Envifill® F25 PSAC
Manufacturer:
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Bioplast® GF 106/02 PSAC
Manufacturer:
No Characteristics
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Envifill® F35 PSAC
Manufacturer:
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Envifill® F40 PSAC
Manufacturer:
No Characteristics
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Bioplast® WRAP 100 PSAC
Manufacturer:
Injection Molding, Blown Film Extrusion, Sheet Extrusion, Contains renewable resources, Biodegradable, Food contact, Thermoforming Food approval 10/2011, Compostable ISO 13432 (Producer), Compostable ISO 13432 (Certificate)
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Blown Film Extrusion, Sheet Extrusion, Contains renewable resources, Biodegradable, Food contact, Thermoforming Food approval 10/2011, Compostable ISO 13432 (Producer), Compostable ISO 13432 (Certificate)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Envifill® F50 PSAC
Manufacturer:
No Characteristics
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Bioplast® TPS PSAC
Manufacturer:
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable ISO 13432 (Producer)
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources, Biodegradable, Food contact, Food approval 10/2011, Compostable ISO 13432 (Producer)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
BIO 465 PS-W
Manufacturer:
Contains renewable resources
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Bioplast® 500 PSAC
Manufacturer:
No Characteristics
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
BC-LBE03
Manufacturer:
BioCérès
Contains renewable resources, Biodegradable
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources, Biodegradable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Compostable B-F12 (PSAC+Polyester)
Manufacturer:
Blown Film Extrusion, Film Extrusion
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Blown Film Extrusion, Film Extrusion
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Bioplast® 400 PSAC
Manufacturer:
BIOTEC
Contains renewable resources, Biodegradable, Compostable
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources, Biodegradable, Compostable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Bioplast® 300 PSAC
Manufacturer:
BIOTEC
Contains renewable resources, Biodegradable, Compostable
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Contains renewable resources, Biodegradable, Compostable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Biome HTX (450) PSAC
Manufacturer:
Biome Bioplastics Limited
Low shrinkage rate (0 - 0.5 %) compared to conventional polymers. Heat stabilized or stable to heat Europe
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low shrinkage rate (0 - 0.5 %) compared to conventional polymers. Heat stabilized or stable to heat Europe
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more