HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (3608 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
7401.2 GF30 PTFE13 SI2
Manufacturer:
ALCOM
improved sliding / wear
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
303 TFE 20 SE
Manufacturer:
RTP
Flame retardant
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ LUBRICOMP™ Compound DFP34
Manufacturer:
Wear Resistant
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
303 TFE 10 FR
Manufacturer:
RTP
Flame retardant
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
303 TFE 15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
302 TFE 15 FR
Manufacturer:
RTP
Flame retardant
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
301 TFE 5
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
302 TFE 10
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
302 TFE 15
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Iupilon LGH2410M
Manufacturer:
Injection Molding
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC+PTFE-GB20
Manufacturer:
Injection Molding
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound DBL32
Manufacturer:
LNP™
Wear Resistant
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound DBL34
Manufacturer:
LNP
Wear Resistant
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
387 TFE 10
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
383 TFE 10
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
STAT-KON™ Compound DEL34
Manufacturer:
LNP™
Electrically Conductive, Wear Resistant
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC+PTFE-CF15
Manufacturer:
Injection Molding
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DEL13EXC
Manufacturer:
LNP™ STAT-KON™
Easy Molding, Electrically Conductive, Wear Resistant
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding, Electrically Conductive, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
STAT-KON™ Compound DEL13PXC
Manufacturer:
LNP
Electrically Conductive, Exceptional Processing, Wear Resistant
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Exceptional Processing, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
381 TFE 10 SE
Manufacturer:
RTP
Flame retardant
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Total 3608 materials | Scroll down for more