HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (25706 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
PA6_Starflam P10002Z
制造商:
None
Flame retardant
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6_Starflam P10003
制造商:
欧星工程塑料
Flame retardant, Low Odor
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Low Odor
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6_Starflam P10002E
制造商:
欧斯特工程塑料
Flame retardant
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6_SCHULAMID® 6 MV 5
制造商:
None
No Characteristics
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6 SCHULAMID® 6 NV 12
制造商:
林德亿巴斯夫工业公司
Injection Molding
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6_SCHULAMID® 6 MV 14 FR
制造商:
None
{'release_agent': None, 'injection_molding': {'preprocessing': 'Pretreatment Predrying: 4-6h / 80°C', 'processing': {'melt_temperature': '250 - 270 °C', 'mould_temperature': '60 - 90 °C'}}}
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'release_agent': None, 'injection_molding': {'preprocessing': 'Pretreatment Predrying: 4-6h / 80°C', 'processing': {'melt_temperature': '250 - 270 °C', 'mould_temperature': '60 - 90 °C'}}}
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6_SCHULAMID® 6 MV 13
制造商:
None
No Characteristics
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6_SCHULAMID® 6 MV 14 FR 4 K1681
制造商:
林德巴塞尔工业公司
Flame retardant
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6_SCHULAMID® 6 MV 14 FR
制造商:
None
{'release_agent': None, 'injection_molding': {'preprocessing': 'Pretreatment Predrying: 4-6h / 80°C', 'processing': {'melt_temperature': '250 - 270 °C', 'mould_temperature': '60 - 90 °C'}}}
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'release_agent': None, 'injection_molding': {'preprocessing': 'Pretreatment Predrying: 4-6h / 80°C', 'processing': {'melt_temperature': '250 - 270 °C', 'mould_temperature': '60 - 90 °C'}}}
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6 SCHULABLEND® 600
制造商:
None
Injection Molding
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6 SCHULAMID® 6 HV 15
制造商:
林德巴塞尔工业
No Characteristics
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6 SCHULAMID® 6 MKF 4014
制造商:
None
No Characteristics
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6_SCHULAMID® 6 MV 14
制造商:
朗盛工业公司
UL 94 Flame rating
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
UL 94 Flame rating
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6 SCHULAMID® 6 HV 15
制造商:
None
No Characteristics
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6 L BLK
制造商:
RTP公司
Injection Molding Heat stabilized or stable to heat
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6_SCHULABLEND® 600U
制造商:
None
Injection Molding
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6_SCHULABLEND® 600U
制造商:
None
Injection Molding
Physical Properties
Density
1.09
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6 SAXAMID™ 126
制造商:
None
Injection Molding Low Odor
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Low Odor
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6 L BLK
制造商:
RTP公司
Injection Molding Heat stabilized or stable to heat
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA6 SAXAMID™ 126U
制造商:
None
No Characteristics
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 25706 materials | Scroll down for more