HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (25727 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA6-MD40_ALTECH PA6 FC 5040/500 MR40
Manufacturer:
Special Features thermal conductive
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Features thermal conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 FC 5040/500 MR40
Manufacturer:
ALTECH
Special Features thermal conductive
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Special Features thermal conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD30_DOMAMID FR 6M30V0E
Manufacturer:
Flame retardant, Halogen-free, Phosphorus-free
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Halogen-free, Phosphorus-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD30_DOMAMID 6LVT30H2 BK
Manufacturer:
No Characteristics
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD30_DOMAMID 6LVT30H1 GY77483
Manufacturer:
No Characteristics
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD30_DOMAMID 6M30
Manufacturer:
No Characteristics
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 4030/109 MR30
Manufacturer:
heat stabilised,easy release (demoulding),injection moulding grade
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),injection moulding grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 4030/100 MR30
Manufacturer:
low warpage
Physical Properties
Density
1.36
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD15
Manufacturer:
No Characteristics
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD20_CELANYL® B3 D05 K20 GY 7040E
Manufacturer:
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD20
Manufacturer:
No Characteristics
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 A 4012/500 MR12
Manufacturer:
heat stabilised, low warpage
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised, low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD+GF_CELANYL® B3 W MGF2010 NC 1102
Manufacturer:
Low Warpage
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD+GF_CELANYL® B3 W MGF2010 NC 1102
Manufacturer:
Low Warpage
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-MD+GF_CELANYL® B3 MGF2515 BK 9005/N
Manufacturer:
Injection Molding
Physical Properties
Density
1.54
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/8.4 GF10 MR20 NC0001-00 PA6-(MD+GF)
Manufacturer:
heat stabilised,easy flow
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/5.2 CF/MR25 PA6-(MD+CF)25
Manufacturer:
electrically conductive,reduced surface resistivity,low warpage,heat stabilised
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
electrically conductive,reduced surface resistivity,low warpage,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/8 GF10 MR20 SV1285-04MCF PA6-(MD+GF)
Manufacturer:
low warpage, heat stabilised, flow line optimised, low tendency to flow lines
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
low warpage, heat stabilised, flow line optimised, low tendency to flow lines
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6-(MD+GF)40
Manufacturer:
Heat stabilized
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6 900/8 GF10 MR20 IM PA6-(MD+GF)30
Manufacturer:
heat stabilised, low warpage, improved surface appearance, impact modified
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised, low warpage, improved surface appearance, impact modified
Recorded properties are for screening; verify source data and conditions.
Total 25727 materials | Scroll down for more