HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2203 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PC-X20
Manufacturer:
increased thermal conductivity,antistatic,heat stabilised
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
increased thermal conductivity,antistatic,heat stabilised
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC-X_ALCOM LB PC 1000 14073 WT1164-14
Manufacturer:
highly reflective,improved surface appearance,easy flow
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
highly reflective,improved surface appearance,easy flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC-X15
Manufacturer:
highly reflective,opaque,impact modified
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
highly reflective,opaque,impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM LB PC 1000 16061 GY1068-16
Manufacturer:
highly reflective,opaque
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
highly reflective,opaque
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC-X15
Manufacturer:
highly reflective,opaque,impact modified
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
highly reflective,opaque,impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC-X15
Manufacturer:
highly reflective,opaque,impact modified
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
highly reflective,opaque,impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC-X15
Manufacturer:
highly reflective,opaque,impact modified
Physical Properties
Density
1.3
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
highly reflective,opaque,impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DTK22
Manufacturer:
Thermally Conductive and Electrically Insulative
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermally Conductive and Electrically Insulative
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DTK22
Manufacturer:
Thermally Conductive and Electrically Insulative
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Thermally Conductive and Electrically Insulative
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
STAT-KON™ Compound DX07323
Manufacturer:
LNP™
Electrically Conductive, Impact Modified, meet ATEX requirements
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Impact Modified, meet ATEX requirements
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DM0051RC
Manufacturer:
LNP™ ELCRIN™
High Modulus, Good Flow, Good Ductility, Low Warpage, Non-Brominated & Non-Chlorinated Flame Retardant
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Good Flow, Good Ductility, Low Warpage, Non-Brominated & Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Compound DX07323
Manufacturer:
LNP™ STAT-KON™
Electrically Conductive, Impact Modified, meet ATEX requirements
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Electrically Conductive, Impact Modified, meet ATEX requirements
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DS0036I
Manufacturer:
LNP™ FARADEX™
Increased electrical conductivity, Flame retardant
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DS0036I
Manufacturer:
LNP™ FARADEX™
Increased electrical conductivity, Flame retardant
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DS0026I
Manufacturer:
LNP™ FARADEX™
High Impact, Flame Retardant, Non-Brominated & Non-Chlorinated Flame Retardant, Electrically Conductive, EMI/RFI shielding
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Impact, Flame Retardant, Non-Brominated & Non-Chlorinated Flame Retardant, Electrically Conductive, EMI/RFI shielding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FARADEX™ Compound DS0026I
Manufacturer:
LNP
High Impact, Flame Retardant, Non-Brominated & Non-Chlorinated Flame Retardant, Electrically Conductive, EMI/RFI shielding
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Impact, Flame Retardant, Non-Brominated & Non-Chlorinated Flame Retardant, Electrically Conductive, EMI/RFI shielding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DS0036I - Europe
Manufacturer:
LNP™ FARADEX™
Increased electrical conductivity, Flame retardant
Physical Properties
Density
1.29
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XANTAR™ MX 1002
Manufacturer:
Impact Modified, Flame Retardant, Good Flow
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact Modified, Flame Retardant, Good Flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Makrolon® FR6020 RE
Manufacturer:
medium viscosity, easy release, UV stabilized, flame retardant, chlorine- and bromine-free flame retardancy, non-reinforced, good hydrolysis resistance, impact modified
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
medium viscosity, easy release, UV stabilized, flame retardant, chlorine- and bromine-free flame retardancy, non-reinforced, good hydrolysis resistance, impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XANTAR™ MX 1004
Manufacturer:
Impact Modified, Flame Retardant, Chlorine/Bromine free
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact Modified, Flame Retardant, Chlorine/Bromine free
Recorded properties are for screening; verify source data and conditions.
Total 2203 materials | Scroll down for more