HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2203 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DF006ER
Manufacturer:
LNP
Easy Molding, Mold Release
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Easy Molding, Mold Release
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DF006LXN
Manufacturer:
LNP™
Low Extractables
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Extractables
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DF006
Manufacturer:
LNP™
Injection Molding
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DF006LXN
Manufacturer:
LNP™
Low Extractables
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Extractables
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
D351RCC
Manufacturer:
LNP™ THERMOCOMP™
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant, Post-Consumer Recycling (PCR) Polycarbonate content up to 40%
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant, Post-Consumer Recycling (PCR) Polycarbonate content up to 40%
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound D351RC
Manufacturer:
LNP™
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound D351RCC
Manufacturer:
LNP
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound D351RC
Manufacturer:
LNP™
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRILOY™ Compound DF206XXH
Manufacturer:
LNP™
Wear Resistant, Healthcare
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Healthcare
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRILOY™ Compound DF206XXH
Manufacturer:
LNP™
Wear Resistant, Healthcare
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Healthcare
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Iupilon GSH2030R2 991J
Manufacturer:
Low Warpage
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Iupilon EGN2030R2
Manufacturer:
Flame retardant, Phosphorus-free
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Phosphorus-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Iupilon EGN2030KR
Manufacturer:
Flame retardant, Phosphorus-free
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, Phosphorus-free
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EMERGE™ PC 4903
Manufacturer:
{'processing': 'Injection Molding', 'special_characteristics': 'Flame retardant'}
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'processing': 'Injection Molding', 'special_characteristics': 'Flame retardant'}
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC ECO 2030/200 GF30
Manufacturer:
contains recycled material
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
contains recycled material
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PC ECO 2030/500 GF30
Manufacturer:
ALTECH
Injection Molding
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound 9F005P
Manufacturer:
Exceptional Processing, CLTE close to Aluminum
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Exceptional Processing, CLTE close to Aluminum
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XANTAR™ G4F 22 UR
Manufacturer:
Flame Retardant, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame Retardant, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XANTAR™ G4F 25 R
Manufacturer:
Flame Retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame Retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XANTAR™ G4F 23 R
Manufacturer:
Flame Retardant, Heat stabilized or stable to heat
Physical Properties
Density
1.17
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame Retardant, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Total 2203 materials | Scroll down for more