HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2203 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound D251
Manufacturer:
LNP™
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound D251
Manufacturer:
LNP™
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRILOY™ Compound DF2041
Manufacturer:
LNP
Wear Resistant
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound D251RCC
Manufacturer:
LNP™
Colorable, High Modulus, Low Warpage, Good Ductility
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Colorable, High Modulus, Low Warpage, Good Ductility
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound DF004 - Americas
Manufacturer:
LNP™
Not specified
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Not specified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
THERMOCOMP™ Compound D251RC
Manufacturer:
LNP™
High Modulus, Low Warpage, Good Ductility
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DF004
Manufacturer:
Injection Molding
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ML4412B
Manufacturer:
LNP™ ELCRIN™
impact modified, injection moldable grade with partial component synthesized from Bio source
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact modified, injection moldable grade with partial component synthesized from Bio source
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRIN™ EXL4412B
Manufacturer:
LNP™
Impact modified, injection moldable
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact modified, injection moldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
D251U
Manufacturer:
LNP™ THERMOCOMP™
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant, Good UV Stability
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant, Good UV Stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DF2041
Manufacturer:
LNP LUBRILOY™
Wear Resistant
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRILOY™ Compound DF204
Manufacturer:
LNP™
Wear Resistant
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
D251RCC
Manufacturer:
Colorable, High Modulus, Low Warpage, Good Ductility
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Colorable, High Modulus, Low Warpage, Good Ductility
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound DFI14
Manufacturer:
LNP™
Wear Resistant
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FXE4472L
Manufacturer:
LEXAN™ VISUALFX™
Impact modified
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ EXL4312
Manufacturer:
LNP™
High impact or impact modified
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ ML4412
Manufacturer:
LNP™
medium flow, impact modified injection moldable grade
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
medium flow, impact modified injection moldable grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRES™ ML4412
Manufacturer:
LNP™
medium flow, impact modified injection moldable grade
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
medium flow, impact modified injection moldable grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ELCRIN™ EXL4412B
Manufacturer:
LNP™
Impact modified, injection moldable
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact modified, injection moldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EXL4412
Manufacturer:
LEXAN™
Impact modified, injection moldable
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact modified, injection moldable
Recorded properties are for screening; verify source data and conditions.
Total 2203 materials | Scroll down for more