HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (11211 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
类别:
Properties
型号:
200 AR 20 TFE 10 (PA66+PTFE)-AF20
制造商:
RTP
Injection Molding
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Titalon 2250AF (PA66+PTFE)-AF
制造商:
None
Injection Molding Low Warpage, Tribologic Grade
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Low Warpage, Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE-AF15_RTP 200 AR 15 TFE 15
制造商:
None
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66/3A/2L1 (PA66+PTFE)-AF15
制造商:
None
Injection Molding
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE-AF15_RTP 200 AR 15 TFE 10
制造商:
None
Injection Molding
Physical Properties
Density
1.24
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRICOMP™ Compound RAL23 (PA66+PTFE)-AF15
制造商:
LNP™
Wear Resistant
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE-AF
制造商:
None
Lubricants
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Lubricants
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LATILUB 66-10T Y/15 (PA66+PTFE)-AF
制造商:
None
No Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRICOMP™ Compound RAL23S (PA66+PTFE)-AF15
制造商:
LNP™
Heat Stabilized, Wear Resistant
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Stabilized, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LNP™ LUBRICOMP™ Compound RAL23SXC (PA66+PTFE)-AF15
制造商:
None
Heat Stabilized, Wear Resistant
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat Stabilized, Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
PA66+PTFE-AF10_LNP™ LUBRICOMP™ Compound RAL22 - Europe
制造商:
沙特基础工业公司
Wear Resistant
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
RAL22S (PA66+PTFE)-AF10
制造商:
LNP™ LUBRICOMP™
Wear Resistant, Heat Stabilized
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Heat Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
200 TFE 5 SI 2 (PA66+PTFE+SI)
制造商:
RTP公司
Injection Molding
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRICOMP™ Compound RAL32 (PA66+PTFE)-AF10
制造商:
LNP™
Wear Resistant
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
RAP22 (PA66+PTFE)-AF10
制造商:
LNP™
Wear Resistant
Physical Properties
Density
1.2
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRICOMP™ Compound RAL229 (PA66+PTFE)-AF10
制造商:
None
Wear Resistant
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
RAL22I (PA66+PTFE)-AF10
制造商:
None
Wear Resistant, High Impact
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, High Impact
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
200 AR 10 TFE 10 (PA66+PTFE)-AF10
制造商:
RTP公司
Injection Molding
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
Titalon 2115AF (PA66+PTFE)-AF10
制造商:
None
No Characteristics
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
类别:
Properties
型号:
LUBRILON 629 (PA66+PTFE+SI)-GF
制造商:
None
No Characteristics
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 11211 materials | Scroll down for more