HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2967 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
LATILUB 73/13-20T (POM+PTFE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Iupital FL2010 (POM+PTFE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Iupital FL2010 (POM+PTFE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
FL2020 (POM+PTFE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LNP™ LUBRICOMP™ Compound KL001
Manufacturer:
Wear Resistant
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KL003E
Manufacturer:
Internally Lubricated, Wear Resistant, Easy Molding
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Internally Lubricated, Wear Resistant, Easy Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
KEBAFORM C 901 TS (POM+PTFE)
Manufacturer:
Tribologic Grade, Copolymer
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Tribologic Grade, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DURACON® YF-5 (POM+PTFE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ESD 800 TFE 5 (POM+PTFE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ESD 800 TFE 10 (POM+PTFE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.42
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DURACON® OL-10 (POM+PTFE)
Manufacturer:
Polyplastics
No Characteristics
Physical Properties
Density
1.41
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Denilub M 00U 4TF (POM+PTFE)
Manufacturer:
Lubricants
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Lubricants
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
DURACON® YF-20 (POM+PTFE)
Manufacturer:
No Characteristics
Physical Properties
Density
1.52
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
C09T /01
Manufacturer:
BESTPOM
Injection Molding Tribologic Grade
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ALCOM POM 770/1 PTFE20
Manufacturer:
improved sliding / wear
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
500AF (POM+PTFE)-Z20
Manufacturer:
high mechanical strength and rigidity, excellent fatigue and impact resistance, resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals, excellent dimensional stability, good electrical insulating characteristics, naturally resilient, self-lubricating
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high mechanical strength and rigidity, excellent fatigue and impact resistance, resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals, excellent dimensional stability, good electrical insulating characteristics, naturally resilient, self-lubricating
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
500AF (POM+PTFE)-Z20
Manufacturer:
high mechanical strength and rigidity, excellent fatigue and impact resistance, resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals, excellent dimensional stability, good electrical insulating characteristics, naturally resilient, self-lubricating
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high mechanical strength and rigidity, excellent fatigue and impact resistance, resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals, excellent dimensional stability, good electrical insulating characteristics, naturally resilient, self-lubricating
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LATILUB 73/13-15T G/15 (POM+PTFE)-GF
Manufacturer:
No Characteristics
Physical Properties
Density
1.6
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LATILUB 73/13-15T G/15 (POM+PTFE)-GF
Manufacturer:
No Characteristics
Physical Properties
Density
1.6
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
807 TFE 15 (POM+PTFE)-GF40
Manufacturer:
RTP
Injection Molding
Physical Properties
Density
1.82
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Total 2967 materials | Scroll down for more