HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (2740 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
VECTRA® MT®4350 VF3001 (natural)
Manufacturer:
Mineral filled grade with low warp, easy flow and smooth surface appearance.
Physical Properties
Density
1.74
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Mineral filled grade with low warp, easy flow and smooth surface appearance.
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
VECTRA® MT®4350 VF3001 (natural)
Manufacturer:
Mineral filled grade with low warp, easy flow and smooth surface appearance. Inherently flame retardant
Physical Properties
Density
1.74
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Mineral filled grade with low warp, easy flow and smooth surface appearance. Inherently flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 53071 EVAC
Manufacturer:
Good Adhesion, Heat Sealable, Copolymer
Physical Properties
Density
0.92
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Heat Sealable, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 53021 EVAC
Manufacturer:
Good Adhesion, Heat Sealable, Copolymer
Physical Properties
Density
0.97
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Heat Sealable, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 72D799 EVAC
Manufacturer:
Good Adhesion, Heat Sealable, Copolymer
Physical Properties
Density
0.932
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Heat Sealable, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 72D727 EVAC
Manufacturer:
No Characteristics
Physical Properties
Density
0.941
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 53007 EVAC
Manufacturer:
Good Adhesion, Heat Sealable, Copolymer
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Heat Sealable, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 53008 EVAC
Manufacturer:
Good Adhesion, Heat Sealable, Copolymer
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Heat Sealable, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 53010 EVAC
Manufacturer:
No Characteristics
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 11D554 EVAC
Manufacturer:
No Characteristics
Physical Properties
Density
0.93
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 53007 EVAC
Manufacturer:
Good Adhesion, Heat Sealable, Copolymer
Physical Properties
Density
0.94
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Heat Sealable, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 2044 EVAC
Manufacturer:
Good Adhesion, Heat Sealable, Copolymer
Physical Properties
Density
0.95
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Good Adhesion, Heat Sealable, Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 11D542 EVAC
Manufacturer:
Blown Film Extrusion, Other Extrusion Food contact, Food approval FDA 21 CFR
Physical Properties
Density
0.93
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Blown Film Extrusion, Other Extrusion Food contact, Food approval FDA 21 CFR
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 1181 EVAC
Manufacturer:
No Characteristics
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
64690 EP-CF50
Manufacturer:
Fatigue Resistance, Low Emission
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Fatigue Resistance, Low Emission
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
APPEEL™ 22D843 (EMA+PP)
Manufacturer:
Blown Film Extrusion, Other Extrusion, Food contact, Food approval FDA 21 CFR
Physical Properties
Density
0.937
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Blown Film Extrusion, Other Extrusion, Food contact, Food approval FDA 21 CFR
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Eastar™ BR003 Copolyester
Manufacturer:
Excellent appearance, nearly water clear, superior chemical resistance, maintains physical properties and appearance when exposed to aromatic oils, optimal combination of chemical resistance, bristle retention, strength, stiffness, processability, clarity, colorability, and feel for toothbrushes, greater design flexibility, can work for virtually any toothbrush configuration, can consolidate resins, food contact articles compliant with 21 CFR 177.1240, migration tests meet compliance requirements of 21 CFR 177.1240(e)(1),(2) and (3)
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent appearance, nearly water clear, superior chemical resistance, maintains physical properties and appearance when exposed to aromatic oils, optimal combination of chemical resistance, bristle retention, strength, stiffness, processability, clarity, colorability, and feel for toothbrushes, greater design flexibility, can work for virtually any toothbrush configuration, can consolidate resins, food contact articles compliant with 21 CFR 177.1240, migration tests meet compliance requirements of 21 CFR 177.1240(e)(1),(2) and (3)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Eastar™ BR003 Copolyester
Manufacturer:
Excellent appearance, superior chemical resistance, optimal molding efficiency, near water clear, bristle retention, strength, stiffness, processability, clarity, colorability, and feel for toothbrushes, greater design flexibility, food contact, food approval FDA 21 CFR
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent appearance, superior chemical resistance, optimal molding efficiency, near water clear, bristle retention, strength, stiffness, processability, clarity, colorability, and feel for toothbrushes, greater design flexibility, food contact, food approval FDA 21 CFR
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Eastar™ BR203 Copolyester
Manufacturer:
Excellent appearance, nearly water clear, superior chemical resistance, maintains physical properties and appearance when exposed to aromatic oils, optimal combination of chemical resistance, bristle retention, strength, stiffness, processability, clarity, colorability, and feel for toothbrushes
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Excellent appearance, nearly water clear, superior chemical resistance, maintains physical properties and appearance when exposed to aromatic oils, optimal combination of chemical resistance, bristle retention, strength, stiffness, processability, clarity, colorability, and feel for toothbrushes
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AN011
Manufacturer:
high flow, excellent appearance and clarity, good physical properties, chemical resistance, easy processing
Physical Properties
Density
1.19
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high flow, excellent appearance and clarity, good physical properties, chemical resistance, easy processing
Recorded properties are for screening; verify source data and conditions.
Total 2740 materials | Scroll down for more