HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (11216 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA66-GF40_DOMAMID 66G40H1
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Complet® LGF40 - PA66
Manufacturer:
Injection Molding
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF40_CELANYL® A3 HH GF40 NC 1102HA
Manufacturer:
Injection Molding Heat stabilized or stable to heat
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Bergamid™ A700 G40 H (f1)
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF40_CELANYL® A3 J GF40 BK 9005U
Manufacturer:
Celanese
No Characteristics
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF40 EcoLon® GF2040-BK1
Manufacturer:
No Characteristics
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF40_CELANYL® A2 HH GF40 NC 11021
Manufacturer:
Celanese
Natural Color
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Natural Color
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
BERGAMID® A70G40
Manufacturer:
Injection Molding
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF40_AKROMID® A3 GF 40 natural 1258
Manufacturer:
No Characteristics
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
AKROMID® A3 GF 40 natural (1258)
Manufacturer:
natural
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
natural
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF40 black (2430)
Manufacturer:
Injection Molding Automotive
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Automotive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A70 G40 BK018
Manufacturer:
Injection Molding
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF40_AKROMID® A3 GF 40 1 LT black 5709
Manufacturer:
No Characteristics
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A70 GF40
Manufacturer:
Badamid
Mechanical properties dry / cond
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Mechanical properties dry / cond
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF40
Manufacturer:
Staramide AG8
Injection Molding, Low Odor
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Low Odor
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF40 A3 GF 40 1 black 2386
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF40_AKROMID® A3 GF 40 8 black 6522
Manufacturer:
Injection Molding, Food contact
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Food contact
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF40 black (2430)
Manufacturer:
Injection Molding Automotive
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Automotive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA6.6 350-H/GF40
Manufacturer:
No Characteristics
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 2040100 GF40
Manufacturer:
heat stabilised,easy release (demoulding),high surface gloss
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),high surface gloss
Recorded properties are for screening; verify source data and conditions.
Total 11216 materials | Scroll down for more