HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (11216 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA66 33 GF BLK/BLK
Manufacturer:
No Characteristics
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA7800G33GN127
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to North America, Europe, Asia Pacific, South and Central America, weather Near East/Africa
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to North America, Europe, Asia Pacific, South and Central America, weather Near East/Africa
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA7800G33BK11
Manufacturer:
U.V. stabilized or stable to weather, Heat stabilized or stable to North America, Europe, Asia Pacific, South and Central America, heat Near East/Africa
Physical Properties
Density
1.33
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to North America, Europe, Asia Pacific, South and Central America, heat Near East/Africa
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RA300G33BK10
Manufacturer:
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
205.3 FR
Manufacturer:
RTP
Flame retardant
Physical Properties
Density
1.69
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA7800G33GN123
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to North America, Europe, Asia Pacific, South and Central America, weather Near East/Africa
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to North America, Europe, Asia Pacific, South and Central America, weather Near East/Africa
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA7003G33YL25
Manufacturer:
Polyram
U.V. stabilized or stable to weather
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF33 RTP 205.3 L
Manufacturer:
Injection Molding
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 33 GF NAT
Manufacturer:
No Characteristics
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA301G33BK23
Manufacturer:
No Characteristics
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
628-33GF
Manufacturer:
Creep Resistance, Low Odor, Thermal Stability
Physical Properties
Density
1.38
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Creep Resistance, Low Odor, Thermal Stability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA301G33BL48
Manufacturer:
Injection Molding
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF33_PGHSLR33-01BK
Manufacturer:
Heat stabilized or stable to heat, Creep Resistance, Fatigue Resistance, Chemical Resistance, Grease Resistance, Hydrolytically Stable, Oil Resistance
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat, Creep Resistance, Fatigue Resistance, Chemical Resistance, Grease Resistance, Hydrolytically Stable, Oil Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PG33-01ABK
Manufacturer:
Heat stabilized or stable to heat, Creep Resistance
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat, Creep Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 G33 HS UV PRTA011 NR351
Manufacturer:
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A3 G33 BRC0001 NR379
Manufacturer:
Nypol®
Injection Molding
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF33_PG33-02BK
Manufacturer:
No Characteristics
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
ND 1233 GF Natural
Manufacturer:
Nymax™
Heat stabilized or stable to heat
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GF33_Nymax™ GF 924 33 UV black 108
Manufacturer:
Injection Molding
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NYLENE® 5133 HS
Manufacturer:
Polymeric Resources Corporation
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 11216 materials | Scroll down for more