HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (11216 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA66-GB25 RTP 204 GB FR
Manufacturer:
Flame retardant
Physical Properties
Density
1.61
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB20
Manufacturer:
ALTECH
heat stabilised,easy release (demoulding),high surface gloss
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),high surface gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB20 RTP 200 GB 20
Manufacturer:
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Wellamid® GS25-66 22L-NBK1
Manufacturer:
Injection Molding
Physical Properties
Density
1.32
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB20
Manufacturer:
ALTECH
heat stabilised,easy release (demoulding),high surface gloss
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),high surface gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
BERGAMID A700GK25U-SO
Manufacturer:
Flame retardant
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB20 RTP 200 GB 20 Z
Manufacturer:
Injection Molding
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A 15 GB NT KW2
Manufacturer:
Organic heat stabilized, standard flow
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Organic heat stabilized, standard flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB20
Manufacturer:
SLOVAMID®66
High impact or impact modified
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB20
Manufacturer:
ALTECH
heat stabilised,easy release (demoulding),high surface gloss
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,easy release (demoulding),high surface gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB20 BK 9005U
Manufacturer:
General purpose grade, high flowability, easy processing, low warpage
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
General purpose grade, high flowability, easy processing, low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
66 GBR 20
Manufacturer:
NYLEM
No Characteristics
Physical Properties
Density
1.26
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-GB25 RTP 202
Manufacturer:
Injection Molding
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 3240100 GK25 GF15
Manufacturer:
heat stabilised,high stiffness,improved surface appearance,easy release (demoulding),low warpage
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,high stiffness,improved surface appearance,easy release (demoulding),low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A65 GK15 natur
Manufacturer:
No Characteristics
Physical Properties
Density
1.23
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CELANYL® A3 H GFB0535 BK 9005/U
Manufacturer:
Low Warpage, Heat Stabilized
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage, Heat Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 A 3240100 GK25 GF15
Manufacturer:
heat stabilised,high stiffness,improved surface appearance,easy release (demoulding),low warpage
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
heat stabilised,high stiffness,improved surface appearance,easy release (demoulding),low warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
66 GF 15 GB 25 TS
Manufacturer:
Low Warpage
Physical Properties
Density
1.45
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
CELANYL® A3 H GFB0535 BK 9005/U
Manufacturer:
Low Warpage, Heat Stabilized
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Warpage, Heat Stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
RFB24
Manufacturer:
No Characteristics
Physical Properties
Density
1.37
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 11216 materials | Scroll down for more