HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (11216 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PA66-CF30_Vydyne® LUB A 30 FC BK TF2
Manufacturer:
standard flow, high stiffness, strength, low coefficient of friction, electrically conductive
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow, high stiffness, strength, low coefficient of friction, electrically conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF30_Vydyne® LUB A 30 FC BK TF13 SI KW
Manufacturer:
standard flow, high stiffness, strength, low coefficient of friction, electrically conductive
Physical Properties
Density
1.35
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
standard flow, high stiffness, strength, low coefficient of friction, electrically conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF40_AKROMID® A3 ICF 40 black 5116
Manufacturer:
Akro-Plastic GmbH
Injection Molding Tribologic Grade
Physical Properties
Density
1.34
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Tribologic Grade
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF40
Manufacturer:
SLOVAMID®66 CF 40
Injection Molding
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 LCF-2030
Manufacturer:
No Characteristics
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
9A22740 H
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.25
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF30_Vydyne® LUB A 30 FC BK TF3
Manufacturer:
high stiffness, strength, low coefficient of friction, electrically conductive
Physical Properties
Density
1.39
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high stiffness, strength, low coefficient of friction, electrically conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF30_WIC PA66 30 N
Manufacturer:
medium viscosity
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
medium viscosity
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
6600 CF 30 HWCP
Manufacturer:
WELLAMID
Increased electrical conductivity, Heat stabilized or stable to Europe heat
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased electrical conductivity, Heat stabilized or stable to Europe heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 LCF-2030 NT-7
Manufacturer:
Long fiber reinforced
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Long fiber reinforced
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF30_Vydyne® STAT A 30 FC BK
Manufacturer:
High stiffness and strength, electrically conductive
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High stiffness and strength, electrically conductive
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
3101T-30V
Manufacturer:
Regional Availability
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Regional Availability
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
NA40 CR30 BK111
Manufacturer:
Tecomid®
Injection Molding
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
66 CF 30 TS
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.28
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF30 black 9103
Manufacturer:
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
E66 K30 BK
Manufacturer:
Meytel
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF30 black 3519
Manufacturer:
No Characteristics
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF30 RTP 285
Manufacturer:
Injection Molding
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF30 3010CF30 BK
Manufacturer:
Injection Molding
Physical Properties
Density
1.27
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66-CF30 RTP 285 H
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.21
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Total 11216 materials | Scroll down for more