HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (11216 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
205.3 TFE 5 HS L
Manufacturer:
RTP
Heat stabilized or stable to heat
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PTFE-GF30 TEREZ® PA 6.6 7500 TF 15 GF 30 H
Manufacturer:
Heat stabilized
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
B 30D03 K08 R01
Manufacturer:
Tislamid
Injection Molding Lubricants
Physical Properties
Density
1.43
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Lubricants
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
205 TFE 15 Z
Manufacturer:
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Tribocomp® PA66 LGF30 TS0 S8
Manufacturer:
No Characteristics
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Titalon 2320TF
Manufacturer:
Titan Plastics Compounds Co., Ltd.
Injection Molding
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
205 TFE 15 UV
Manufacturer:
RTP
U.V. stabilized or stable to weather
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Tribocomp® PA66 LGF30 PTFE18 N6
Manufacturer:
Injection Molding
Physical Properties
Density
1.53
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TECACOMP® PA66 GF30 TF15 HI black 3366
Manufacturer:
No Characteristics
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PTFE-GF30 TF15 HI natural 3133
Manufacturer:
Injection Molding
Physical Properties
Density
1.46
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PTFE-GF30 PENTAMID A GV30 H TF15 black
Manufacturer:
No Characteristics
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound RZL16
Manufacturer:
LNP™
Wear Resistant, Dimensional Control
Physical Properties
Density
1.4
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant, Dimensional Control
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
205 TFE 10 HS
Manufacturer:
RTP
Heat stabilized or stable to heat
Physical Properties
Density
1.44
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA4802G6NT
Manufacturer:
Injection Molding RoHS compliant
Physical Properties
Density
1.5
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding RoHS compliant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A 640/352
Manufacturer:
Injection Molding
Physical Properties
Density
1.49
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
LUBRICOMP™ Compound RFL36
Manufacturer:
LNP
Wear Resistant
Physical Properties
Density
1.51
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Wear Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66+PTFE-GF30
Manufacturer:
No Characteristics
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A70 GF30 TF3 H
Manufacturer:
Badamid
TF3 H
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
TF3 H
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
A70 GF30 TF3 H S1
Manufacturer:
Badamid
Heat stabilized
Physical Properties
Density
1.47
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA66 910/8 GF30 PTFE15
Manufacturer:
improved sliding / wear,high heat stabilised
Physical Properties
Density
1.48
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
improved sliding / wear,high heat stabilised
Recorded properties are for screening; verify source data and conditions.
Total 11216 materials | Scroll down for more