HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (8647 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
POLYMAN® (ABS) LC 145 ABS
Manufacturer:
Injection Molding, Profile Extrusion, Sheet Extrusion, Anti-static, Platable Thermoforming
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Profile Extrusion, Sheet Extrusion, Anti-static, Platable Thermoforming
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POLYMAN® (ABS) E/HI ABS
Manufacturer:
Extrusion, Injection moulding, Profile Extrusion, Sheet Extrusion, Other
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Extrusion, Injection moulding, Profile Extrusion, Sheet Extrusion, Other
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POLYMAN® ABS HH 3 D
Manufacturer:
Increased heat resistant, good flow behaviour
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Increased heat resistant, good flow behaviour
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POLYMAN® (ABS) LP 137 A
Manufacturer:
Impact ABS grade with antistatic
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Impact ABS grade with antistatic
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POLYMAN® ABS LC HH
Manufacturer:
No Characteristics
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-764B
Manufacturer:
{'Flame_retidant': 'Flame retardant', 'Light_stabilized': 'Light stabilized or stable to light', 'UV_stabilized': 'UV stabilized or stable to weather', 'Heat_stabilized': 'Heat stabilized or stable to heat'}
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
{'Flame_retidant': 'Flame retardant', 'Light_stabilized': 'Light stabilized or stable to light', 'UV_stabilized': 'UV stabilized or stable to weather', 'Heat_stabilized': 'Heat stabilized or stable to heat'}
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-777D
Manufacturer:
Heat stabilized or stable to heat
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-757H
Manufacturer:
High Gloss
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-764G
Manufacturer:
Flame retardant, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Physical Properties
Density
1.22
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-757 G70
Manufacturer:
POLYLAC
general injection molding
Physical Properties
Density
-
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
general injection molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POLYLAC PA-747S
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-757 A01
Manufacturer:
High Gloss
Physical Properties
Density
1.07
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High Gloss
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-747F
Manufacturer:
Not specified
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Not specified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-717C
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-747R
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PA-726M
Manufacturer:
No Characteristics
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
POLYLAC PA-746 ABS
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
X00 ABS
Manufacturer:
No Characteristics
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
V0X ABS
Manufacturer:
Polykemi AB
Flame retardant
Physical Properties
Density
1.16
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
XX0 ABS
Manufacturer:
No Characteristics
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 8647 materials | Scroll down for more