HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
1452
Manufacturer:
Low Odor, Weldable
Physical Properties
Density
0.99
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Odor, Weldable
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1413-t2
Manufacturer:
Flame retardant, U.V. stabilized or stable to weather
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1413-t3
Manufacturer:
Low Odor
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Low Odor
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1413
Manufacturer:
Injection Molding, Profile Extrusion, Sheet Extrusion, Coating, Acid Resistance, Alkali Resistance, Environmental Stress Crack Resistance, Solvent Resistance
Physical Properties
Density
0.99
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Profile Extrusion, Sheet Extrusion, Coating, Acid Resistance, Alkali Resistance, Environmental Stress Crack Resistance, Solvent Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1414-t2
Manufacturer:
Flame retardant, U.V. stabilized or stable to weather
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1413-t1
Manufacturer:
Injection Molding, Profile Extrusion, Sheet Extrusion, Coating
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Profile Extrusion, Sheet Extrusion, Coating
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1411
Manufacturer:
Injection Molding, Profile Extrusion, Sheet Extrusion, Coating, Acid Resistance, Alkali Resistance, Environmental Stress Crack Resistance, Solvent Resistance
Physical Properties
Density
0.99
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Profile Extrusion, Sheet Extrusion, Coating, Acid Resistance, Alkali Resistance, Environmental Stress Crack Resistance, Solvent Resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1412-t3
Manufacturer:
Flame retardant, U.V. stabilized or stable to weather
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1410
Manufacturer:
No Characteristics
Physical Properties
Density
0.99
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1411-t1
Manufacturer:
Injection Molding, Profile Extrusion, Sheet Extrusion, Coating, Color Stability, Chemical Resistance, Special Characteristics, Regional Availability, Flame retardant, U.V. stabilized or stable to weather
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding, Profile Extrusion, Sheet Extrusion, Coating, Color Stability, Chemical Resistance, Special Characteristics, Regional Availability, Flame retardant, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1411-t2
Manufacturer:
No Characteristics
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1412-t2
Manufacturer:
No Characteristics
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
1411-t3
Manufacturer:
Flame retardant, U.V. stabilized or stable to weather
Physical Properties
Density
1.06
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Flame retardant, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INVISION VX-5080UI
Manufacturer:
Injection Molding Soft Feel
Physical Properties
Density
0.88
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Soft Feel
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INVISION VX-5090UI
Manufacturer:
Injection Molding Soft Feel
Physical Properties
Density
0.89
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Soft Feel
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EXCELINK® 1800B
Manufacturer:
JSR
No Characteristics
Physical Properties
Density
0.89
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EXCELINK® 1200B
Manufacturer:
JSR
No Characteristics
Physical Properties
Density
0.88
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
INVISION VX-5085UI
Manufacturer:
Injection Molding Soft Feel
Physical Properties
Density
0.89
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Soft Feel
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EXCELINK® 1300B
Manufacturer:
No Characteristics
Physical Properties
Density
0.88
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
EXCELINK® 1700B
Manufacturer:
JSR
No Characteristics
Physical Properties
Density
0.88
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more