HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (162623 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
TRC 364NA 9051 BLACK
Manufacturer:
Injection Molding Blush Resistance/Low Crease Whitening, Low Emission, Scratch Resistant
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding Blush Resistance/Low Crease Whitening, Low Emission, Scratch Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hostacom TRC 787N 1 NATURAL
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TRC 364NA 7J07 BSLT GRY DK
Manufacturer:
Blush Resistance/Low Crease Whitening, Low Emission, Scratch Resistant
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Blush Resistance/Low Crease Whitening, Low Emission, Scratch Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPO-MX 364NA 7H52
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Blush Resistance/Low Crease Whitening, Low Emission, Scratch Resistant
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Blush Resistance/Low Crease Whitening, Low Emission, Scratch Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TRC 483N NA
Manufacturer:
High impact or impact modified, Scratch Resistant
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, Scratch Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TRC 364NA NATRL
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TRC 352NA 92W
Manufacturer:
Injection Molding
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TRC 364NA 8Q97 GING BEIGE
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to North America weather
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to North America weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TRC 352NA PX7 NUTRIABEIGE
Manufacturer:
Injection Molding
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPO-MX_Hostacom TRC 364N NA 1B88
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to North America weather
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to North America weather
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
Hostacom TRC 352NA 82V TITAN
Manufacturer:
Injection Molding
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPO-MX_Hostacom TRC 352N NA2 82V T
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPO-MX 364NA 7E94ALPACA GRY LT
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Blush Resistance/Low Crease Whitening, Low Emission, Scratch Resistant
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Blush Resistance/Low Crease Whitening, Low Emission, Scratch Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPO-MX_Hostacom TRC 352NA NATURAL
Manufacturer:
Injection Molding
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TRC 787N NATRL
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TPO-MX 364NA 8N84 MANDEL BEIGE
Manufacturer:
High impact or impact modified, U.V. stabilized or stable to weather, Blush Resistance/Low Crease Whitening, Low Emission, Scratch Resistant
Physical Properties
Density
1.03
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified, U.V. stabilized or stable to weather, Blush Resistance/Low Crease Whitening, Low Emission, Scratch Resistant
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TRC 352N 1NA
Manufacturer:
No Characteristics
Physical Properties
Density
1.05
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TRC 104N
Manufacturer:
Injection Molding
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Injection Molding
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TRC 2065N D82920
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
TRC 2065N C12360
Manufacturer:
High impact or impact modified
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
High impact or impact modified
Recorded properties are for screening; verify source data and conditions.
Total 162623 materials | Scroll down for more