HIGH PERFORMANCE
Material Properties Database
Genuine Material
Tiered Pricing
Browse engineering and specialty plastics by grade, manufacturer and recorded properties. Selecting PEEK, PPS, PA66 or another polymer requires more than comparing resin names: reinforcement, processing, moisture and service environment can all matter. When comparing melt flow, mechanical strength and heat resistance, check the test standard, temperature, load and specimen condition. Values obtained under different conditions are not directly interchangeable. Missing data is not zero or a failure. Confirm the manufacturer’s original technical information and test the candidate under the intended conditions before making a final selection.
Material Properties (5414 Items)
Compare
Category
Model
Manufacturer
Characteristics
Compare
Category:
Properties
Grade:
PPcompound 7706
Manufacturer:
high scratch resistance, high stiffness, good impact and high flow
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high scratch resistance, high stiffness, good impact and high flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7795
Manufacturer:
high scratch resistance, good stiffness, high impact and excellent flow
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high scratch resistance, good stiffness, high impact and excellent flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 6614
Manufacturer:
mineral filled, high flow, good impact, high stiffness level, low shrinkage, CLTE
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
mineral filled, high flow, good impact, high stiffness level, low shrinkage, CLTE
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7510
Manufacturer:
mineral filled
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
mineral filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7530
Manufacturer:
mineral filled
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
mineral filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7605
Manufacturer:
high scratch resistance, good stiffness, high impact, high flow, low density, broad processing window, good esthetical performance
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high scratch resistance, good stiffness, high impact, high flow, low density, broad processing window, good esthetical performance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7575U
Manufacturer:
modified mineral filled
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
modified mineral filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7705
Manufacturer:
high scratch resistance, high stiffness, good impact and high flow
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high scratch resistance, high stiffness, good impact and high flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7693
Manufacturer:
very high flow, high stiffness, good impact resistance
Physical Properties
Density
1.01
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
very high flow, high stiffness, good impact resistance
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7705
Manufacturer:
high scratch resistance, high stiffness, good impact and high flow
Physical Properties
Density
1.04
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high scratch resistance, high stiffness, good impact and high flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 7500
Manufacturer:
mineral filled
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
mineral filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 55T1030
Manufacturer:
exceptional stiffness combined with a high impact resistance (even at low temperatures)
Physical Properties
Density
1.13
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
exceptional stiffness combined with a high impact resistance (even at low temperatures)
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 5020
Manufacturer:
high impact, good stiffness, high flow
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
high impact, good stiffness, high flow
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 5020
Manufacturer:
No Characteristics
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
No characteristics
data
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 5040
Manufacturer:
impact-modified
Physical Properties
Density
0.905
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
impact-modified
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 50MBTX
Manufacturer:
Copolymer
Physical Properties
Density
1.02
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
Copolymer
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 2550/4
Manufacturer:
mineral filled
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
mineral filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 2550/4
Manufacturer:
mineral filled
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
mineral filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 2632/7
Manufacturer:
mineral filled
Physical Properties
Density
1.0
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
mineral filled
Recorded properties are for screening; verify source data and conditions.
Compare
Category:
Properties
Grade:
PPcompound 2605
Manufacturer:
excellent impact stiffness balance with a low density
Physical Properties
Density
0.96
g/cm³
Thermal Properties
Melting Point
- °C
Key Characteristics
excellent impact stiffness balance with a low density
Recorded properties are for screening; verify source data and conditions.
Total 5414 materials | Scroll down for more